RE: [CAD_CAM_EDM_DRO] Re: lead screw or rack and pinion ?

Les
I and some others must have missed your description of the long surface
scraping method. Would appreciate if you could describe it again, possibly
in a separate thread.
Thanks
John C

-----Original Message-----
From: Les Watts [mailto:leswatts@...]
Sent: Tuesday, 2 July 2002 12:26 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: lead screw or rack and pinion ?

Snip

I use a scraping method I have mentioned before to get long accurate
surfaces
to mount linear rails on. Lately I have had good results with filled epoxy
and bondo.
Apply a thin layer to the steel and "scrape" (actually sand) it. After a
rail is
bolted on you have the added benefit of a constrained layer damper.

Les

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.



Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/