Re: [CAD_CAM_EDM_DRO] lead screw or rack and pinion ?
Posted by
Chris L
on 2002-06-26 20:53:50 UTC
I was thinking you had it Cast it looked so nice.
Sheet Steel....Well, that's more evidence of just how good your work is. Nice job.
Thanks for sharing,
Chris L
JanRwl@... wrote:
Sheet Steel....Well, that's more evidence of just how good your work is. Nice job.
Thanks for sharing,
Chris L
JanRwl@... wrote:
> >> This lathe has a base which consists of a brake-formed
> shell which is ONE sheet of 0.175" mild steel sheet, with 2.5" sides folded
> down. Then I used 2x2x3/16" angle-iron I cut and welded on intervals under
> that, and to the edges, stiffening it considerably. Oh, and 3/4" angle
> welded inside to the "rims" with swaged-in ΒΌ-20 inserts for bolt-down. I
> also welded the "corners" where the edges "came together" when formed. Once
> all the "nasty" was done (welding, grinding, etc.), I milled the bottom "rim"
> true all around on a BP mill, and then bead-blasted it all around. Then
> primer and finally almond paint. Looks like a new fridge.<<<
Discussion Thread
turbulatordude
2002-06-25 18:40:10 UTC
lead screw or rack and pinion ?
Chris L
2002-06-25 19:39:13 UTC
Re: [CAD_CAM_EDM_DRO] lead screw or rack and pinion ?
JanRwl@A...
2002-06-25 19:59:44 UTC
Re: [CAD_CAM_EDM_DRO] lead screw or rack and pinion ?
Chris L
2002-06-25 20:30:01 UTC
Re: [CAD_CAM_EDM_DRO] lead screw or rack and pinion ?
Les Watts
2002-06-26 05:02:18 UTC
Re: [CAD_CAM_EDM_DRO] lead screw or rack and pinion ?
JanRwl@A...
2002-06-26 18:57:26 UTC
Re: [CAD_CAM_EDM_DRO] lead screw or rack and pinion ?
Chris L
2002-06-26 20:53:50 UTC
Re: [CAD_CAM_EDM_DRO] lead screw or rack and pinion ?
cmedwards_lu
2002-06-30 17:28:02 UTC
Re: lead screw or rack and pinion ?
turbulatordude
2002-06-30 17:45:30 UTC
Re: lead screw or rack and pinion ?
Les Watts
2002-07-01 07:19:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: lead screw or rack and pinion ?
John Craddock
2002-07-01 14:46:35 UTC
RE: [CAD_CAM_EDM_DRO] Re: lead screw or rack and pinion ?
Les Watts
2002-07-01 17:09:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: lead screw or rack and pinion ?
cmedwards_lu
2002-07-01 19:28:58 UTC
Re: lead screw or rack and pinion ?
turbulatordude
2002-07-01 19:53:55 UTC
Cheap leadscrew nut ( was Re: lead screw or rack and pinion ?
JanRwl@A...
2002-07-01 20:53:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: lead screw or rack and pinion ?
wanliker@a...
2002-07-01 23:23:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: lead screw or rack and pinion ?