CAD CAM EDM DRO - Yahoo Group Archive

[CAD_CAM_EDM_DRO] Re: Mobilitiy, machine skates

Posted by Brian Pitt
on 2002-07-05 13:56:13 UTC
I've seen one shop that built steel pallets around the base of the machine
with channels on the outside and straps under so it only raised the base
about 1/4" off the floor
then they could use a pallet jack to move them around and make short run
work cells with two or three machines at a time or shove an idle machine
out of the way when they needed more room

Brian

Discussion Thread

John 2002-07-04 16:22:18 UTC Mobilitiy, machine skates Marcus & Eva 2002-07-04 18:47:47 UTC Re: [CAD_CAM_EDM_DRO] Mobilitiy, machine skates Jon Elson 2002-07-04 22:42:28 UTC Re: [CAD_CAM_EDM_DRO] Mobilitiy, machine skates Ian W. Wright 2002-07-05 01:45:25 UTC Re: [CAD_CAM_EDM_DRO] Mobilitiy, machine skates bjammin@i... 2002-07-05 04:28:22 UTC Re: [CAD_CAM_EDM_DRO] Mobilitiy, machine skates rekmac 2002-07-05 06:25:13 UTC Re: Mobilitiy, machine skates Brian Pitt 2002-07-05 13:56:13 UTC [CAD_CAM_EDM_DRO] Re: Mobilitiy, machine skates