Re: [CAD_CAM_EDM_DRO] Re: Stepper Motor and Cable Shielding. Any tips?

A logic analyzer with a scope display gives you what amounts to a multi
channel timing diagram.

----- Original Message -----
From: "eforum3001" <eforum@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, July 25, 2002 9:12 AM
Subject: [CAD_CAM_EDM_DRO] Re: Stepper Motor and Cable Shielding. Any tips?


> "Peter Homann" <peter.homann@a...> wrote:
> > Hi,
> >
> > A logic analyser? You obviously know what a logic probe is, so,
> imagine
> > having 8 logic probes and instead of 3 LEDs indicating the probe
> status, you
> > are able to capture and display the probe status, at 25MHz. Also,
> the
> > display shows the 8 lines simultaneously.
> > The logic analyser can capture 16K or more samples for analysis
>
> With a logic probe, one can see if a pin is high/low/pulsing.What are
> the main advantages of a logic analyser compared with the probe?
>
> Thanks
>
> Peter
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>