Re: [CAD_CAM_EDM_DRO] BDI question

> I hate to do this to you guys, I down loaded BDI 2.16, I've got a
> computer with a wipped hard drive, now how do I proceed to do the
> install?
> Richard

OK Richard, Some questions first,

Have you got it burned to cd yet? Not sure how far along or computer savy
you are so bear with me. By burned to cd I don't mean the iso image file
just copied to the CD but the CD must be created from the downloaded image
file.
coping the file to the cd will get you nowhere.

If you've got that far, and your computer will boot from a CD then just put
the CD in the drive, turn it on and follow the prompts. Pretty self
explanatory to install from this point.

If your computer will not boot from cd, then you will need to make a boot
disk which has the directions on the CD you just created, I believe they are
in the DOS utilities directory

Tell us a little more and we should be able to get you up and running
without
too much trouble. (famous last words)

What type of computer do you have (speed, hard drive and memory size)
Video should be a min. of 800 X 600
Stepper motors or servo motors, and if servo motors are you planning to go
with an analog type system or step and direction type (like Geckos or Rutex)

Bill

>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.

> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a

sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.

DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........

>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>