CAD CAM EDM DRO - Yahoo Group Archive

Confused over My own Calculations!

Posted by mayfieldtm
on 2002-08-17 14:07:25 UTC
No Wait! I screwed that up also!!

That is Three! Shinano motors at 14 Amps each
And One Vexta motor at 12 Amps.
Total would be 14+14+14+12 times 2/3 equals approx. 36 amps total
draw.

Tom M.

Just shoot me.


--- In CAD_CAM_EDM_DRO@y..., "mayfieldtm" <mayfiet@i...> wrote:
> Given:
> Three Shinano motors with a Name Plate rating of "3.5A".
> 4 windings connected in parallel (2 pair), so that would be 4 times
> 3.5Amps for a total of 14 Ampers.
>
> One Vexta motor with a Name Plate rating of "3A".
> 4 windings connected in parallel, so that would be 4 times 3Amps
for
> a total of 12 Ampers.
>
> Adding these gives 26 Amps.
> Multiply by 2/3 for a result of approx. 18 Amp total current draw
> from power supply.
>

Discussion Thread

mayfieldtm 2002-08-17 13:42:20 UTC Confused over Mariss's Calculations mayfieldtm 2002-08-17 14:07:25 UTC Confused over My own Calculations! turbulatordude 2002-08-17 20:03:03 UTC Re: Confused over My own Calculations! mayfieldtm 2002-08-18 00:03:06 UTC Re: Confused over My own Calculations! Jon Elson 2002-08-18 10:52:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Confused over My own Calculations! mayfieldtm 2002-08-18 13:24:06 UTC Re: Confused over My own Calculations! Jon Elson 2002-08-18 13:39:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Confused over My own Calculations! mariss92705 2002-08-18 17:07:03 UTC Re: Confused over My own Calculations! William Scalione 2002-08-18 17:49:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Confused over My own Calculations! mariss92705 2002-08-18 18:36:41 UTC Re: Confused over My own Calculations! Jon Elson 2002-08-18 20:33:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Confused over My own Calculations! William Scalione 2002-08-19 00:35:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Confused over My own Calculations! turbulatordude 2002-08-19 06:11:38 UTC 8 wire steppers ( was Re: Confused over My own Calculations!