Shock Warning
Posted by
mayfieldtm
on 2002-08-17 13:59:01 UTC
--- In CAD_CAM_EDM_DRO@y..., "mariss92705" <mariss92705@y...> wrote:
If you-all are like me, whenever I work around machines, tools and
sharp things like chips and tool bits, my hands often have numerous
cuts.
Be very careful when poking around with electrics with a cut finger.
Even 12 volts can be lethel under just the wrong conditions.
Or so I've heard, (could be just a tall tail)
If nothing else, it might make you do the Jig.
Tom M. :~(
>True, but don't forget that human skin is an insulator.
> You have to work very hard to get shocked by voltages less than
> 80VDC. It may tickle a little bit but that's about it.
>
If you-all are like me, whenever I work around machines, tools and
sharp things like chips and tool bits, my hands often have numerous
cuts.
Be very careful when poking around with electrics with a cut finger.
Even 12 volts can be lethel under just the wrong conditions.
Or so I've heard, (could be just a tall tail)
If nothing else, it might make you do the Jig.
Tom M. :~(
Discussion Thread
Lloyd Leung
2002-08-15 21:03:45 UTC
Here's my proposed power supply setup.
mariss92705
2002-08-16 01:13:19 UTC
Re: Here's my proposed power supply setup.
rawen2
2002-08-16 09:43:38 UTC
Q for Mariss (was Re: Here's my proposed power supply setup.)
mayfieldtm
2002-08-16 09:45:38 UTC
Re: Here's my proposed power supply setup.
JJ
2002-08-16 12:58:43 UTC
RE: [CAD_CAM_EDM_DRO] Re: Here's my proposed power supply setup.
JJ
2002-08-16 13:02:50 UTC
RE: [CAD_CAM_EDM_DRO] Q for Mariss (was Re: Here's my proposed power supply setup.)
mayfieldtm
2002-08-16 14:53:34 UTC
Re: Here's my proposed power supply setup.
turbulatordude
2002-08-16 15:37:50 UTC
Q for Mariss (was Re: Here's my proposed power supply setup.)
mariss92705
2002-08-16 18:32:01 UTC
Re: Here's my proposed power supply setup.
mariss92705
2002-08-16 18:42:42 UTC
Q for Mariss (was Re: Here's my proposed power supply setup.)
Jon Elson
2002-08-16 21:35:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Here's my proposed power supply setup.
Lloyd Leung
2002-08-16 22:05:01 UTC
RE: [CAD_CAM_EDM_DRO] Re: Here's my proposed power supply setup.
andrewyslee
2002-08-16 22:30:11 UTC
quickie LED lesson
Lloyd Leung
2002-08-16 22:36:13 UTC
RE: [CAD_CAM_EDM_DRO] quickie LED lesson
turbulatordude
2002-08-17 06:31:37 UTC
Re: Here's my proposed power supply setup.
Les Watts
2002-08-17 07:25:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Here's my proposed power supply setup.
JJ
2002-08-17 09:36:42 UTC
RE: [CAD_CAM_EDM_DRO] Re: Here's my proposed power supply setup.
mariss92705
2002-08-17 11:56:07 UTC
Re: Here's my proposed power supply setup.
mariss92705
2002-08-17 12:01:00 UTC
Re: Here's my proposed power supply setup.
Mike
2002-08-17 12:51:50 UTC
RE: [CAD_CAM_EDM_DRO] quickie LED lesson
pcfw
2002-08-17 12:51:50 UTC
Re: quickie LED lesson
Brian
2002-08-17 13:41:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Here's my proposed power supply setup.
mayfieldtm
2002-08-17 13:59:01 UTC
Shock Warning
JJ
2002-08-17 14:32:15 UTC
RE: [CAD_CAM_EDM_DRO] Shock Warning
Matt Shaver
2002-08-17 19:31:26 UTC
Re: [CAD_CAM_EDM_DRO] Shock Warning
JanRwl@A...
2002-08-17 20:03:43 UTC
Re: [CAD_CAM_EDM_DRO] quickie LED lesson
turbulatordude
2002-08-17 20:30:15 UTC
Re: Shock Warning
Keith Green
2002-08-17 20:51:02 UTC
Re: [CAD_CAM_EDM_DRO] Shock Warning
mayfieldtm
2002-08-18 00:19:02 UTC
Re: Shock Warning
stevenson_engineers
2002-08-18 01:43:55 UTC
Re: Shock Warning
mariss92705
2002-08-18 04:10:55 UTC
Re: Shock Warning
stevenson_engineers
2002-08-18 04:30:11 UTC
Re: Shock Warning
bjammin@i...
2002-08-18 04:35:56 UTC
Re: [CAD_CAM_EDM_DRO] Shock Warning
bjammin@i...
2002-08-18 04:36:07 UTC
waaaay OT
JJ
2002-08-18 05:33:10 UTC
RE: [CAD_CAM_EDM_DRO] Shock Warning
turbulatordude
2002-08-18 06:21:07 UTC
Re: waaaay OT
Mike
2002-08-18 06:33:12 UTC
RE: [CAD_CAM_EDM_DRO] quickie LED lesson
mayfieldtm
2002-08-18 09:08:05 UTC
Re: quickie LED lesson
Ian W. Wright
2002-08-18 09:38:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Shock Warning
Clinton Driggars
2002-08-18 11:48:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Shock Warning
wanliker@a...
2002-08-18 12:06:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Shock Warning
JanRwl@A...
2002-08-18 13:39:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Shock Warning
JanRwl@A...
2002-08-18 14:00:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: waaaay OT
JanRwl@A...
2002-08-18 14:04:06 UTC
Re: [CAD_CAM_EDM_DRO] quickie LED lesson
George Wealleans
2002-08-18 15:20:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Shock Warning
wanliker@a...
2002-08-18 16:59:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: waaaay OT
cncnovice
2002-08-18 17:28:01 UTC
Re: Shock Warning
Keith Green
2002-08-18 17:41:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Shock Warning
Zoran A. Scepanovic
2002-08-19 01:24:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Shock Warning
bjammin@i...
2002-08-19 02:56:12 UTC
waaaay waaaaay beyond OT
caudlet
2002-08-19 05:35:14 UTC
Re: Shock Warning