Re: [CAD_CAM_EDM_DRO] Wall Wart for a Gecko

On Wed, 21 Aug 2002 15:12:31 -0700, you wrote:

>Hi Again Kelly,
>
>I just noticed that you were talking about a SIX VOLT wall wart. BAD
>IDEA! Use ONLY a 5V wall wart! or the "PC" voltage supplies. The
>300-500 ma should be fine, 'tho.

And an addition to that - most of the cheap "wall warts" (as you Yanks
like to call them ;) are poorly regulated. I've seen 12V supplies that
put out 22V!!!

(Not a measuring error).


Steve Blackmore
--
Pilot Consultancy Limited ***** Computer Consultants
Telephone 01744 752256 Mobile 07831 768478
Email: steve@... WWW: http://www.pilotltd.net