CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Need Zero Help!!

Posted by Dave Engvall
on 2002-09-12 23:11:06 UTC
Ed,
Check out the Set-Coordinates script...
It allows you to easily set G54 thru G59.3 offsets.
That is...after setting say g55 for the current zero then in your program
or MDI
G55
...rest of program
M2

It will reset at end of program but since it is invoked at the start of the
program it works.
Ray Henry wrote a long post on emclist about the persistence, etc of g92. I
think it varies with the BDI version.
Good luck.
Dave

On 9/12/02 4:18 PM, "EdFanta" <atex57@...> wrote:

>
>
> Alan Marconett KM6VV wrote:
>>
>> Hi Ed,
>>
>> Have you tried a "G92 X0 Y0 Z0" MDI command?
>>
>
> No, but I will real quick! Thanks for the fast responce. Ed.
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Discussion Thread

EdFanta 2002-09-12 14:57:36 UTC Need Zero Help!! Alan Marconett KM6VV 2002-09-12 15:03:02 UTC Re: [CAD_CAM_EDM_DRO] Need Zero Help!! EdFanta 2002-09-12 15:19:16 UTC Re: [CAD_CAM_EDM_DRO] Need Zero Help!! Tim Goldstein 2002-09-12 15:37:48 UTC Re: [CAD_CAM_EDM_DRO] Need Zero Help!! Ray Henry 2002-09-12 16:41:53 UTC Re: Re: Need Zero Help!! Les Watts 2002-09-12 17:33:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Need Zero Help!! Jon Elson 2002-09-12 22:11:17 UTC Re: [CAD_CAM_EDM_DRO] Need Zero Help!! Dave Engvall 2002-09-12 23:11:06 UTC Re: [CAD_CAM_EDM_DRO] Need Zero Help!! Alan Marconett KM6VV 2002-09-13 00:16:04 UTC Re: [CAD_CAM_EDM_DRO] Need Zero Help!! Ray Henry 2002-09-13 13:04:39 UTC Re: Re: Re: Re: Need Zero Help!! Ray Henry 2002-09-13 13:13:53 UTC Re: Re: Need Zero Help!! Jon Elson 2002-09-13 16:29:33 UTC Re: [CAD_CAM_EDM_DRO] Need Zero Help!!