CAD CAM EDM DRO - Yahoo Group Archive

Re: How do I rout a sharp inside corner?

Posted by Fred Smith
on 2002-11-28 08:29:13 UTC
--- In CAD_CAM_EDM_DRO@y..., "Les Watts" <leswatts@a...> wrote:

> V-bit carving is an obvious way to get some inside corners on
> limited shapes that I should have mentioned since I do it all the
time
> for sign lettering. A program to do this that fits hobbyist's
budgets
> is called vcarvz. It is available from Fred (IMservice) on this list
> as a demo.

Vcarvz creates 3D toolpaths to carve closed shapes. It includes
corner sharpening. This is accomplished by drawing the V cutter up
from the depth of cut to the surface at the corner. It works well
for true-type text, logos, and and designs consisting of closed, non
overlapping shapes and saved in a DXF file. It automatically
handles "island" conditions in which shapes are fully enclosed within
others, and alternates the carved in and carved outines cutting.

Output is 3D DXF or Vector PLC.


Links and demos are at http://www.imsrv.com


Best Regards, Fred Smith- IMService

Listserve Special discounts and offers are at:
http://www.imsrv.com/grp.html

We are THE source for low cost Cad Cam

Discussion Thread

echnidna 2002-11-27 15:15:53 UTC How do I rout a sharp inside corner? Les Watts 2002-11-27 17:12:31 UTC Re: [CAD_CAM_EDM_DRO] How do I rout a sharp inside corner? echnidna 2002-11-27 18:26:09 UTC Re: How do I rout a sharp inside corner? doug98105 2002-11-27 18:47:54 UTC Re: How do I rout a sharp inside corner? echnidna 2002-11-27 18:49:10 UTC Re: How do I rout a sharp inside corner? echnidna 2002-11-27 18:54:08 UTC Re: How do I rout a sharp inside corner? Brian Pitt 2002-11-28 00:53:17 UTC Re: [CAD_CAM_EDM_DRO] How do I rout a sharp inside corner? Les Watts 2002-11-28 05:20:50 UTC Re: [CAD_CAM_EDM_DRO] How do I rout a sharp inside corner? Fred Smith 2002-11-28 08:29:13 UTC Re: How do I rout a sharp inside corner?