CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: extending linear rail by butting two pieces together

Posted by doug king
on 2002-12-20 23:20:14 UTC
No sweat.Hotsaw 'em off,deburr 'em and butt 'em together.We did it all the time on our robot track systems.Make sure they're seated against the registration surface,so they're parallel.We would pad them,and use clamps to seat them as we were tightening them down.It is best to "time" the cuts,so you have the ends fastened by the mounting bolts.This prevents "walking".Good luck! Doug King.
"dolph_and_nicole <dolph@...>" <dolph@...> wrote:Just curious - have the same situation (20mm THK rail). I have a
sherline mill, and wondering if i can just mill the ends off square?
I have called a few machine shops in the area, and they have either
said 'you need to grind them' or 'i have never heard of THK square
rails, are you sure they arent round?'

Also - mounting to 8020 extrusion, and curious if there are tricks to
keeping the 'butt' aligned. (w/ key pushing the ends together,
etc...)
Thanks!
Eric
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Robert Campbell"
wrote:
> Derek,
>
> Two pieces of THK type rails can be butted.
>
> Bob
>
> ----- Original Message -----
> From: "tig415"
> To:
> Sent: Sunday, November 17, 2002 2:23 PM
> Subject: [CAD_CAM_EDM_DRO] extending linear rail by butting two
pieces
> together
>
>
> > Has any one had any luck butting two pieces of flat linear rail
> > together to make a longer piece.
> > I need to extend my z axis and have a couple of short pieces that
> > would work perfectly.
> >
> > Thanks
> > Derek




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




---------------------------------
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now

[Non-text portions of this message have been removed]

Discussion Thread

tig415 2002-11-17 14:23:26 UTC extending linear rail by butting two pieces together JanRwl@A... 2002-11-17 14:43:49 UTC Re: [CAD_CAM_EDM_DRO] extending linear rail by butting two pieces together William Scalione 2002-11-17 14:49:10 UTC Re: [CAD_CAM_EDM_DRO] extending linear rail by butting two pieces together Robert Campbell 2002-11-17 14:50:40 UTC Re: [CAD_CAM_EDM_DRO] extending linear rail by butting two pieces together dolph_and_nicole <dolph@s... 2002-12-20 06:22:59 UTC Re: extending linear rail by butting two pieces together Robert Campbell 2002-12-20 07:41:26 UTC Re: [CAD_CAM_EDM_DRO] Re: extending linear rail by butting two pieces together tig415 <tig416@e... 2002-12-20 10:29:35 UTC Re: extending linear rail by butting two pieces together William Scalione 2002-12-20 12:51:34 UTC Re: [CAD_CAM_EDM_DRO] Re: extending linear rail by butting two pieces together doug king 2002-12-20 23:20:14 UTC Re: [CAD_CAM_EDM_DRO] Re: extending linear rail by butting two pieces together Peter 2002-12-21 13:55:54 UTC Re: [CAD_CAM_EDM_DRO] Re: extending linear rail by butting two pieces together