Card, kit or schematic for Kuluga/Mauch DRO card wanted

WOW! Everything is coming out of the woodwork! The Hans-W DRO (very nice
from what I could see), Kuluga/Mauch DRO, Circuit Cellar DRO, and now the
Boondog DRO at: http://www.boondog.com/%5Ctutorials%5C7266%5C7266.htm

Thanks guys!

Vince

----- Original Message -----
From: <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, January 03, 2003 11:14 AM
Subject: [CAD_CAM_EDM_DRO] making DRO boards (was Re: Card, kit or schematic
for Kuluga/Mauch DRO card


> Hi Guys,
>
> a little reviewing and it seems that this project uses the internal
> slot for the ISA connection in a standard PC.
>
> Although I am pretty sure you can adapt it to a PCI bus, it is laid
> out around a ISA bus.
>
> The problem with getting cards made is that this would be a press in
> card into the PC motherboard. that means cutting a section to insert
> into the slot.
>
> since the circuit is so simple, I would propose 2 methods to get it
> done.
>
> #1, buy a prototype board from Jameco P/N 21531 or something
> similar. then stuffing it and using jumper wires for connections.
> These are going for a $22.95 plus shipping.
>
> #2, cut out a NIC or other ISA card, have a small board made and then
> bolt that onto the salvage board and jumper that board into the
> correct pins.
>
> and here is a link from another similar project.
> http://www.boondog.com/%5Ctutorials%5C7266%5C7266.htm
>
>
> my $0.02 worth.
>
>
>
> Dave
>
>
>
>
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "j.guenther"
> <j.guenther@v...> wrote:
> > Thanks Tim,
> >
> > I just got the latest stuff from your site, and all that seems to
> be missing
> > (unless I just missed it) is the schematic for the 4 axis card. I
> will be
> > checking with a couple of the PC board houses listed in Circuit
> Cellar to
> > get a cost on getting the boards made. I will check with Dan
> Mauch, off
> > line, to see if it is permissible to get a few boards made for
> others on the
> > list.
> >
> > Many thanks to you and Dan for making this information available to
> the
> > group.
> >
> > John Guenther
> > 'Ye Olde Pen Maker'
> > Sterling, Virginia
> >
> > > -----Original Message-----
> > > From: Tim Goldstein [mailto:timg@k...]
> > > Sent: Friday, January 03, 2003 12:58 PM
> > > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subject: Re: [CAD_CAM_EDM_DRO] Card, kit or schematic for
> Kuluga/Mauch
> > > DRO card wanted
> > >
> > >
> > > John,
> > >
> > > The only difference is an additional LS-7266. All other chips are
> > > the same.
> > >
> > > Tim
> > > [Denver, CO]
> > > Sherline products at Deep Discount
> > > Mach1 & DeskCNC with Credit Card ordering
> > > www.KTMarketing.com/Sherline
> > > www.KTMarketing.com/DeskCNC
> > >
> > >
> > > ----- Original Message -----
> > > > Tim,
> > > >
> > > > Thanks, I got the stuff from you site but what I really want is
> > > the 4 axis
> > > > card.
> > > >
> > > > John Guenther
> > > > 'Ye Olde Pen Maker'
> > > > Sterling, Virginia
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...
> > > Moderator: jmelson@a... timg@k... [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > > reach it if you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > > to be a sister site to the CCED group, as many of the same
> > > members are there, for OT subjects, that are not allowed on the
> CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > > POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> > > EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>