Re: [CAD_CAM_EDM_DRO] making DRO boards (was Re: Card, kit or schematic for Kuluga/Mauch DRO card

Has anyone ever made one of these for a PCI bus? I've just noticed that
my motherboard has no ISA slots!

--C.S.

>Hi Guys,
>
>a little reviewing and it seems that this project uses the internal
>slot for the ISA connection in a standard PC.
>
>Although I am pretty sure you can adapt it to a PCI bus, it is laid
>out around a ISA bus.
>
>The problem with getting cards made is that this would be a press in
>card into the PC motherboard. that means cutting a section to insert
>into the slot.
>
>since the circuit is so simple, I would propose 2 methods to get it
>done.
>
>#1, buy a prototype board from Jameco P/N 21531 or something
>similar. then stuffing it and using jumper wires for connections.
>These are going for a $22.95 plus shipping.
>
>#2, cut out a NIC or other ISA card, have a small board made and then
>bolt that onto the salvage board and jumper that board into the
>correct pins.
>
>and here is a link from another similar project.
>http://www.boondog.com/%5Ctutorials%5C7266%5C7266.htm
>
>my $0.02 worth.
>
>Dave
>
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, "j.guenther"
><j.guenther@v...> wrote:
>> Thanks Tim,
>>
>> I just got the latest stuff from your site, and all that seems to
>be missing
>> (unless I just missed it) is the schematic for the 4 axis card. I
>will be
>> checking with a couple of the PC board houses listed in Circuit
>Cellar to
>> get a cost on getting the boards made. I will check with Dan
>Mauch, off
>> line, to see if it is permissible to get a few boards made for
>others on the
>> list.
>>
>> Many thanks to you and Dan for making this information available to
>the
>> group.
>>
>> John Guenther
>> 'Ye Olde Pen Maker'
>> Sterling, Virginia
>>
>> > -----Original Message-----
>> > From: Tim Goldstein [mailto:timg@k...]
>> > Sent: Friday, January 03, 2003 12:58 PM
>> > To: CAD_CAM_EDM_DRO@yahoogroups.com
>> > Subject: Re: [CAD_CAM_EDM_DRO] Card, kit or schematic for
>Kuluga/Mauch
>> > DRO card wanted
>> >
>> >
>> > John,
>> >
>> > The only difference is an additional LS-7266. All other chips are
>> > the same.
>> >
>> > Tim
>> > [Denver, CO]
>> > Sherline products at Deep Discount
>> > Mach1 & DeskCNC with Credit Card ordering
>> > www.KTMarketing.com/Sherline
>> > www.KTMarketing.com/DeskCNC
>> >
>> >
>> > ----- Original Message -----
>> > > Tim,
>> > >
>> > > Thanks, I got the stuff from you site but what I really want is
>> > the 4 axis
>> > > card.
>> > >
>> > > John Guenther
>> > > 'Ye Olde Pen Maker'
>> > > Sterling, Virginia
>> >
>> >
>> >
>> > Addresses:
>> > FAQ: http://www.ktmarketing.com/faq.html
>> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>> >
>> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...
>> > Moderator: jmelson@a... timg@k... [Moderator]
>> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>> >
>> > OFF Topic POSTS: General Machining
>> > If you wish to post on unlimited OT subjects goto:
>> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>> > reach it if you have trouble.
>> > http://www.metalworking.com/news_servers.html
>> >
>> > http://groups.yahoo.com/group/jobshophomeshop I consider this
>> > to be a sister site to the CCED group, as many of the same
>> > members are there, for OT subjects, that are not allowed on the
>CCED list.
>> >
>> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
>> > POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
>> > EXCEPTIONS........
>> > bill
>> > List Mom
>> > List Owner
>> >
>> >
>> >
>> > Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>> >
>> >
>> >
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/
>rec.crafts.metalworking or go thru Google.com to reach it if you have

trouble.

>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>