Re: [CAD_CAM_EDM_DRO] Card, kit or schematic for Kuluga/Mauch DRO card wanted

> WOW! Everything is coming out of the woodwork! The Hans-W DRO (very nice
> from what I could see), Kuluga/Mauch DRO, Circuit Cellar DRO, and now the
> Boondog DRO at: http://www.boondog.com/%5Ctutorials%5C7266%5C7266.htm
>
> Thanks guys!
>
> Vince
>
> ----- Original Message -----
> From: <davemucha@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Friday, January 03, 2003 11:14 AM
> Subject: [CAD_CAM_EDM_DRO] making DRO boards (was Re: Card, kit or schematic
> for Kuluga/Mauch DRO card
>
> > Hi Guys,
> >
> > a little reviewing and it seems that this project uses the internal
> > slot for the ISA connection in a standard PC.
> >
> > Although I am pretty sure you can adapt it to a PCI bus, it is laid
> > out around a ISA bus.
> >
> > The problem with getting cards made is that this would be a press in
> > card into the PC motherboard. that means cutting a section to insert
> > into the slot.
> >
> > since the circuit is so simple, I would propose 2 methods to get it
> > done.
> >
> > #1, buy a prototype board from Jameco P/N 21531 or something
> > similar. then stuffing it and using jumper wires for connections.
> > These are going for a $22.95 plus shipping.
> >
> > #2, cut out a NIC or other ISA card, have a small board made and then
> > bolt that onto the salvage board and jumper that board into the
> > correct pins.
> >
> > and here is a link from another similar project.
> > http://www.boondog.com/%5Ctutorials%5C7266%5C7266.htm
> >
> >
> > my $0.02 worth.
> >
> >
> >
> > Dave
> >
> >
> >
> >
> >
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "j.guenther"
> > <j.guenther@v...> wrote:
> > > Thanks Tim,
> > >
> > > I just got the latest stuff from your site, and all that seems to
> > be missing
> > > (unless I just missed it) is the schematic for the 4 axis card. I
> > will be
> > > checking with a couple of the PC board houses listed in Circuit
> > Cellar to
> > > get a cost on getting the boards made. I will check with Dan
> > Mauch, off
> > > line, to see if it is permissible to get a few boards made for
> > others on the
> > > list.
> > >
> > > Many thanks to you and Dan for making this information available to
> > the
> > > group.
> > >
> > > John Guenther
> > > 'Ye Olde Pen Maker'
> > > Sterling, Virginia
> > >
> > > > -----Original Message-----
> > > > From: Tim Goldstein [mailto:timg@k...]
> > > > Sent: Friday, January 03, 2003 12:58 PM
> > > > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > > > Subject: Re: [CAD_CAM_EDM_DRO] Card, kit or schematic for
> > Kuluga/Mauch
> > > > DRO card wanted
> > > >
> > > >
> > > > John,
> > > >
> > > > The only difference is an additional LS-7266. All other chips are
> > > > the same.
> > > >
> > > > Tim
> > > > [Denver, CO]
> > > > Sherline products at Deep Discount
> > > > Mach1 & DeskCNC with Credit Card ordering
> > > > www.KTMarketing.com/Sherline
> > > > www.KTMarketing.com/DeskCNC
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > Tim,
> > > > >
> > > > > Thanks, I got the stuff from you site but what I really want is
> > > > the 4 axis
> > > > > card.
> > > > >
> > > > > John Guenther
> > > > > 'Ye Olde Pen Maker'
> > > > > Sterling, Virginia
> > > >
> > > >
> > > >
> > > > Addresses:
> > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > >
> > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...
> > > > Moderator: jmelson@a... timg@k... [Moderator]
> > > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > >
> > > > OFF Topic POSTS: General Machining
> > > > If you wish to post on unlimited OT subjects goto:
> > > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > > > reach it if you have trouble.
> > > > http://www.metalworking.com/news_servers.html
> > > >
> > > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > > > to be a sister site to the CCED group, as many of the same
> > > > members are there, for OT subjects, that are not allowed on the
> > CCED list.
> > > >
> > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > > > POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> > > > EXCEPTIONS........
> > > > bill
> > > > List Mom
> > > > List Owner
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/