RE: [CAD_CAM_EDM_DRO] making DRO boards (was Re: Card, kit orschematic for Kuluga/Mauch DRO card

That was one of the reasons I discontinued it.
Dan

-----Original Message-----
From: C.S. Mo [mailto:cs@...]
Sent: Friday, January 03, 2003 11:19 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com; turbulatordude <davemucha@...>
Subject: Re: [CAD_CAM_EDM_DRO] making DRO boards (was Re: Card, kit
orschematic for Kuluga/Mauch DRO card


Has anyone ever made one of these for a PCI bus? I've just noticed that
my motherboard has no ISA slots!

--C.S.

>Hi Guys,
>
>a little reviewing and it seems that this project uses the internal
>slot for the ISA connection in a standard PC.
>
>Although I am pretty sure you can adapt it to a PCI bus, it is laid
>out around a ISA bus.
>
>The problem with getting cards made is that this would be a press in
>card into the PC motherboard. that means cutting a section to insert
>into the slot.
>
>since the circuit is so simple, I would propose 2 methods to get it
>done.
>
>#1, buy a prototype board from Jameco P/N 21531 or something
>similar. then stuffing it and using jumper wires for connections.
>These are going for a $22.95 plus shipping.
>
>#2, cut out a NIC or other ISA card, have a small board made and then
>bolt that onto the salvage board and jumper that board into the
>correct pins.
>
>and here is a link from another similar project.
>http://www.boondog.com/%5Ctutorials%5C7266%5C7266.htm
>
>my $0.02 worth.
>
>Dave
>
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, "j.guenther"
><j.guenther@v...> wrote:
>> Thanks Tim,
>>
>> I just got the latest stuff from your site, and all that seems to
>be missing
>> (unless I just missed it) is the schematic for the 4 axis card. I
>will be
>> checking with a couple of the PC board houses listed in Circuit
>Cellar to
>> get a cost on getting the boards made. I will check with Dan
>Mauch, off
>> line, to see if it is permissible to get a few boards made for
>others on the
>> list.
>>
>> Many thanks to you and Dan for making this information available to
>the
>> group.
>>
>> John Guenther
>> 'Ye Olde Pen Maker'
>> Sterling, Virginia
>>
>> > -----Original Message-----
>> > From: Tim Goldstein [mailto:timg@k...]
>> > Sent: Friday, January 03, 2003 12:58 PM
>> > To: CAD_CAM_EDM_DRO@yahoogroups.com
>> > Subject: Re: [CAD_CAM_EDM_DRO] Card, kit or schematic for
>Kuluga/Mauch
>> > DRO card wanted
>> >
>> >
>> > John,
>> >
>> > The only difference is an additional LS-7266. All other chips are
>> > the same.
>> >
>> > Tim
>> > [Denver, CO]
>> > Sherline products at Deep Discount
>> > Mach1 & DeskCNC with Credit Card ordering
>> > www.KTMarketing.com/Sherline www.KTMarketing.com/DeskCNC
>> >
>> >
>> > ----- Original Message -----
>> > > Tim,
>> > >
>> > > Thanks, I got the stuff from you site but what I really want is
>> > the 4 axis
>> > > card.
>> > >
>> > > John Guenther
>> > > 'Ye Olde Pen Maker'
>> > > Sterling, Virginia
>> >
>> >
>> >
>> > Addresses:
>> > FAQ: http://www.ktmarketing.com/faq.html
>> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>> >
>> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...
>> > Moderator: jmelson@a... timg@k... [Moderator]
>> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>> >
>> > OFF Topic POSTS: General Machining
>> > If you wish to post on unlimited OT subjects goto:
>> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>> > reach it if you have trouble.
>> > http://www.metalworking.com/news_servers.html
>> >
>> > http://groups.yahoo.com/group/jobshophomeshop I consider this
>> > to be a sister site to the CCED group, as many of the same members
>> > are there, for OT subjects, that are not allowed on the
>CCED list.
>> >
>> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>> > THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
>> > EXCEPTIONS........ bill
>> > List Mom
>> > List Owner
>> >
>> >
>> >
>> > Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>> >
>> >
>> >
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]

>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/
>rec.crafts.metalworking or go thru Google.com to reach it if you have

trouble.

>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there,
>for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/