CAD CAM EDM DRO - Yahoo Group Archive

Re: I need more power

on 2003-02-07 12:42:40 UTC
That looks very workable. the jackshaft was one option I was
considdering. I have room for it and most of the bits and pieces.

Seems an additional 4:1 would increase power with what I have.

If I jump to a triple stack in the process, then it keeps everyting
simple.

Dave



--- In CAD_CAM_EDM_DRO@yahoogroups.com, Marv Frankel <dcdziner@p...>
wrote:
> Dave,
> Take a look at the picture at
> http://groups.yahoo.com/group/mill_drill/files/Homebrew%
20powerfeed/IMG_0977
> .JPG. Although its gearing to drive the X axis of a mill, I think
it would
> work on your drill press. He also has a dimensioned CAD drawing on
the same
> site.
>
> Marv Frankel
>
> ----- Original Message -----
> From: <davemucha@j...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Friday, February 07, 2003 10:30 AM
> Subject: [CAD_CAM_EDM_DRO] Re: I need more power
>
>
> > Hi MArv,
> >
> > I just pulled the thing apart to get teh numbers for new bearings.
> >
> > check the photos section - daves stuff - drill1 and drill2 and
drill3
> > the Large L is what it would look like if I put on a pretty big
> > timing pulley.
> >
> > since the unit is just loosly assembled for the picutres you
should
> > get the idea, just please don't aske mt to tightent the belt !
> >
> > It seems the large L gear will fit : ) but I might need a little
> > clearance for the parts !
> >
> > Dave
> >
> >
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, Marv Frankel
<dcdziner@p...>
> > wrote:
> > > Dave,
> > > It might be easier to visualize, if you could post a
> > picture or two,
> > > of the present installation, or attach them to a direct email
to me.
> > >
> > > Marv Frankel
> > > Los Angeles
> > > dcdziner@p...
> > >
> > > ----- Original Message -----
> > > From: <davemucha@j...>
> > > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > > Sent: Friday, February 07, 2003 7:57 AM
> > > Subject: [CAD_CAM_EDM_DRO] I need more power
> > >
> > >
> > > > Hi guys,
> > > >
> > > > I'v got a NEMA34 single stack on a drill press feed.
> > > > the stepper has a 24 tooth XL drive gear and the drill have a
72
> > XL
> > > > tooth driven gear.
> > > >
> > > > I'd like to increase power considderably.
> > > >
> > > > I am thinking that my most obvious choices are;
> > > > get a bigger stepper,
> > > > add a jackshaft and another timing belt set
> > > > switch to a gear motor
> > > > add a worm gear.
> > > > change down feed to a ball screw or something.
> > > >
> > > > I've been looking at gear heads for Oriental motors, but they
seem
> > > > like they are for AC motors, not steppers.
> > > >
> > > > I am limited on space, could use a NEMA34 triple stack. I am
> > > > wondering if I would then need to switch out from the XL
belts?
> > > > (my 50 tooth L gear is HUGE ! so that is not real attractive)
> > > >
> > > > any suggestions ?
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Addresses:
> > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > >
> > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@a...,
> > > timg@k...
> > > > Moderator: pentam@c... indigo_red@q... [Moderators]
> > > > URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > >
> > > > OFF Topic POSTS: General Machining
> > > > If you wish to post on unlimited OT subjects goto:
> > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > reach it if
> > > you have trouble.
> > > > http://www.metalworking.com/news_servers.html
> > > >
> > > > http://groups.yahoo.com/group/jobshophomeshop I consider
this
> > to be a
> > > sister site to the CCED group, as many of the same members are
> > there, for OT
> > > subjects, that are not allowed on the CCED list.
> > > >
> > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > POSTING THEM.
> > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > > bill
> > > > List Mom
> > > > List Owner
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a...,
> timg@k...
> > Moderator: pentam@c... indigo_red@q... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a
> sister site to the CCED group, as many of the same members are
there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >

Discussion Thread

turbulatordude <davemucha@j... 2003-02-07 07:59:52 UTC I need more power Marv Frankel 2003-02-07 08:59:31 UTC Re: [CAD_CAM_EDM_DRO] I need more power James Owens 2003-02-07 09:03:25 UTC Re: [CAD_CAM_EDM_DRO] I need more power turbulatordude <davemucha@j... 2003-02-07 10:30:46 UTC Re: I need more power j.guenther 2003-02-07 10:44:07 UTC RE: [CAD_CAM_EDM_DRO] Re: I need more power turbulatordude <davemucha@j... 2003-02-07 10:56:38 UTC Re: I need more power Bernard R <bwjarandall@c... 2003-02-07 11:31:24 UTC Re: I need more power Marv Frankel 2003-02-07 12:08:43 UTC Re: [CAD_CAM_EDM_DRO] Re: I need more power turbulatordude <davemucha@j... 2003-02-07 12:42:40 UTC Re: I need more power torsten98001 <torsten@g... 2003-02-07 19:45:54 UTC Re: I need more power