Re: I need more power
Posted by
turbulatordude <davemucha@j...
on 2003-02-07 10:30:46 UTC
Hi MArv,
I just pulled the thing apart to get teh numbers for new bearings.
check the photos section - daves stuff - drill1 and drill2 and drill3
the Large L is what it would look like if I put on a pretty big
timing pulley.
since the unit is just loosly assembled for the picutres you should
get the idea, just please don't aske mt to tightent the belt !
It seems the large L gear will fit : ) but I might need a little
clearance for the parts !
Dave
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Marv Frankel <dcdziner@p...>
wrote:
I just pulled the thing apart to get teh numbers for new bearings.
check the photos section - daves stuff - drill1 and drill2 and drill3
the Large L is what it would look like if I put on a pretty big
timing pulley.
since the unit is just loosly assembled for the picutres you should
get the idea, just please don't aske mt to tightent the belt !
It seems the large L gear will fit : ) but I might need a little
clearance for the parts !
Dave
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Marv Frankel <dcdziner@p...>
wrote:
> Dave,picture or two,
> It might be easier to visualize, if you could post a
> of the present installation, or attach them to a direct email to me.XL
>
> Marv Frankel
> Los Angeles
> dcdziner@p...
>
> ----- Original Message -----
> From: <davemucha@j...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Friday, February 07, 2003 7:57 AM
> Subject: [CAD_CAM_EDM_DRO] I need more power
>
>
> > Hi guys,
> >
> > I'v got a NEMA34 single stack on a drill press feed.
> > the stepper has a 24 tooth XL drive gear and the drill have a 72
> > tooth driven gear.wanliker@a...,
> >
> > I'd like to increase power considderably.
> >
> > I am thinking that my most obvious choices are;
> > get a bigger stepper,
> > add a jackshaft and another timing belt set
> > switch to a gear motor
> > add a worm gear.
> > change down feed to a ball screw or something.
> >
> > I've been looking at gear heads for Oriental motors, but they seem
> > like they are for AC motors, not steppers.
> >
> > I am limited on space, could use a NEMA34 triple stack. I am
> > wondering if I would then need to switch out from the XL belts?
> > (my 50 tooth L gear is HUGE ! so that is not real attractive)
> >
> > any suggestions ?
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> timg@k...reach it if
> > Moderator: pentam@c... indigo_red@q... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> you have trouble.to be a
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
> sister site to the CCED group, as many of the same members arethere, for OT
> subjects, that are not allowed on the CCED list.POSTING THEM.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........http://docs.yahoo.com/info/terms/
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> >
> >
Discussion Thread
turbulatordude <davemucha@j...
2003-02-07 07:59:52 UTC
I need more power
Marv Frankel
2003-02-07 08:59:31 UTC
Re: [CAD_CAM_EDM_DRO] I need more power
James Owens
2003-02-07 09:03:25 UTC
Re: [CAD_CAM_EDM_DRO] I need more power
turbulatordude <davemucha@j...
2003-02-07 10:30:46 UTC
Re: I need more power
j.guenther
2003-02-07 10:44:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: I need more power
turbulatordude <davemucha@j...
2003-02-07 10:56:38 UTC
Re: I need more power
Bernard R <bwjarandall@c...
2003-02-07 11:31:24 UTC
Re: I need more power
Marv Frankel
2003-02-07 12:08:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: I need more power
turbulatordude <davemucha@j...
2003-02-07 12:42:40 UTC
Re: I need more power
torsten98001 <torsten@g...
2003-02-07 19:45:54 UTC
Re: I need more power