stepper
Posted by
Gene
on 2003-02-21 17:39:46 UTC
I have a nema 42 stepper motor and I was wondering if anyone can make
sense of the wiring. It has 6 terminal screws and with the O meter set
to 200 heres what I get.
term.1 to term.3--1.9 ohms
term.1 to term.6--1.3 ohms
term.2 to term.4--1.3 ohms
term.2 to term.5--1.3 ohms
term.3 to term.1--1.9 ohms
term.3 to term.6--1.3 ohms
term.4 to term.5--1.9 ohms
term.4 to term.2--1.3 ohms
term.5 to term.2--1.3 ohms
term.5 to term.4--1.9 ohms
term.6 to term.3--1.3 ohms
term.6 to term.1--1.3 ohms
I am wondering which is the full coil and which is the half coil.
sense of the wiring. It has 6 terminal screws and with the O meter set
to 200 heres what I get.
term.1 to term.3--1.9 ohms
term.1 to term.6--1.3 ohms
term.2 to term.4--1.3 ohms
term.2 to term.5--1.3 ohms
term.3 to term.1--1.9 ohms
term.3 to term.6--1.3 ohms
term.4 to term.5--1.9 ohms
term.4 to term.2--1.3 ohms
term.5 to term.2--1.3 ohms
term.5 to term.4--1.9 ohms
term.6 to term.3--1.3 ohms
term.6 to term.1--1.3 ohms
I am wondering which is the full coil and which is the half coil.
Discussion Thread
Gene
2002-07-25 22:40:10 UTC
stepper
Jon Elson
2002-07-26 21:43:59 UTC
Re: [CAD_CAM_EDM_DRO] stepper
Gene
2003-02-21 17:39:46 UTC
stepper
turbulatordude <davemucha@j...
2003-02-21 17:49:21 UTC
Re: stepper
Jefferson H. Tomlinson <jeffersont@a...
2003-02-21 19:29:46 UTC
Re: stepper
Gene
2003-02-22 12:56:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper
Gene
2004-05-21 15:57:38 UTC
stepper
Roy J. Tellason
2004-05-21 16:23:19 UTC
Re: [CAD_CAM_EDM_DRO] stepper
Gene
2004-05-21 17:37:30 UTC
Re: [CAD_CAM_EDM_DRO] stepper
Roy J. Tellason
2004-05-21 18:02:22 UTC
Re: [CAD_CAM_EDM_DRO] stepper