Re: [CAD_CAM_EDM_DRO] Re: Hot rolled router frame: added note

Interesting, Frank. Which file is it?
I could not find it.
Les
Leslie M. Watts
L M Watts Furniture
Tiger, Georgia USA
http://www.alltel.net/~leswatts/wattsfurniturewp.html
Engineering page:
http://www.alltel.net/~leswatts/shop.html
Surplus CNC for sale:
http://www.alltel.net/~leswatts/forsale.html

----- Original Message -----
From: <dakota8833@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, March 01, 2003 10:18 AM
Subject: [CAD_CAM_EDM_DRO] Re: Hot rolled router frame: added note


> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Leslie M. Watts"
> <leswatts@a...> wrote:
> > Yes, I think you are on the right track. You could attach pad
> support points
> > to the tubing and then mill just the points flat- averting stress
> induced
> > warpage
> > since you are not machining the tubing itself.
> >
> > I did find the previous message about grouting pads
> > on tubing in my archives so I will include it here with
> > some added comments:
> > -------------------------------------------------------------------
> I used hot rolled on my cnc router, drilled all the holes, welded
> everything up and then used epoxy for my rail base. I set a waxed
> precision level into the epoxy.