Re: [CAD_CAM_EDM_DRO] Re: Hot rolled router frame: added note

Steve,

I have a write up on the rapid grind/scraping technique
on the engineering site. This is good for creating a
precision flat surface on solid stock. For the grouted
pads on structural tubing my write-up is in the message archives of this
group. I will try a search
and then see if I can post that on my website.
It was a year or so ago I think.

This method is increasingly popular with machine
builders as no machining (or machining stresses)
are applied to the structural member. One can
routinely achieve split thousandth straightness
over many feet .

Les

Les
Leslie M. Watts
L M Watts Furniture
Tiger, Georgia USA
http://www.alltel.net/~leswatts/wattsfurniturewp.html
Engineering page:
http://www.alltel.net/~leswatts/shop.html
Surplus CNC for sale:
http://www.alltel.net/~leswatts/forsale.html

----- Original Message -----
From: <tacman@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, February 28, 2003 5:05 PM
Subject: [CAD_CAM_EDM_DRO] Re: Hot rolled router frame: added note


> Grouted on pads as I and others use are even better in my opinion.
> > There are pictures and descriptions on my engineering
> > web site. Virtually no machining is required, and the tubing does
> not have
> > to be straight.
>
>
> Hi Les,
>
> I am interested in this process but could not find any description on
> your web site.
>
> Steve
>