Mach1 closed loop? sortof-NOW was Mach1 w/ toolchanger? Yes.
Posted by
ballendo <ballendo@y...
on 2003-03-04 05:59:48 UTC
Jon,
Yes. more than "hope"...
Ballendo
P.S. They're a few things Art has to do first, but encoders are
already being read; and the s/w is even now set up to "read the
pulses" for input of position (Art feeds these "inputs" with "fake
pulses"--from his output p/streams-- for now) So it's not too far
from already done. Especially since Art has probably become the world
expert on at least the motion planning and interpreter parts of the
EMC source... AND he has more than a bit of the "big boys" of cnc as
interested parties... And they'll want real servos...
Yes. more than "hope"...
Ballendo
P.S. They're a few things Art has to do first, but encoders are
already being read; and the s/w is even now set up to "read the
pulses" for input of position (Art feeds these "inputs" with "fake
pulses"--from his output p/streams-- for now) So it's not too far
from already done. Especially since Art has probably become the world
expert on at least the motion planning and interpreter parts of the
EMC source... AND he has more than a bit of the "big boys" of cnc as
interested parties... And they'll want real servos...
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...> wrote:
> what Mach2 will
> do! Any hope that Mach2 will allow closed-loop operation, ie.
encoder
> feedback?
>
> Jon
Discussion Thread
Randy Gordon-Gilmore
2003-02-16 13:46:56 UTC
Measuring backlash more accurately?
Jon Elson
2003-02-16 15:45:27 UTC
Re: [CAD_CAM_EDM_DRO] Measuring backlash more accurately?
Randy Gordon-Gilmore
2003-02-16 17:24:11 UTC
Re: Measuring backlash more accurately?
torsten98001 <torsten@g...
2003-02-16 18:16:29 UTC
Re: Measuring backlash more accurately?
Jon Elson
2003-02-16 21:26:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring backlash more accurately?
Randy Gordon-Gilmore
2003-02-16 23:27:34 UTC
Re: Measuring backlash more accurately?
Randy Gordon-Gilmore
2003-02-16 23:35:01 UTC
Re: Measuring backlash more accurately?
torsten98001 <torsten@g...
2003-02-17 03:59:26 UTC
Re: Measuring backlash more accurately?
Hoyt McKagen
2003-02-17 04:29:27 UTC
Re: [CAD_CAM_EDM_DRO] Measuring backlash more accurately?
Jon Elson
2003-02-17 06:59:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring backlash more accurately?
Randy Gordon-Gilmore
2003-02-18 16:25:04 UTC
Re: Measuring backlash more accurately?
justjuha <juha.keisala@n...
2003-02-19 02:15:16 UTC
Re: Measuring backlash more accurately?
Jon Elson
2003-02-19 10:42:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring backlash more accurately?
Bob Simon
2003-02-19 16:28:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring backlash more accurately?
ballendo <ballendo@y...
2003-02-20 04:48:23 UTC
axis clamping was Re: Measuring backlash more accurately?
ballendo <ballendo@y...
2003-02-20 06:18:30 UTC
axis clamps/brakes was Re: Measuring backlash more accurately?
Fred Smith <imserv@v...
2003-02-20 06:32:09 UTC
axis clamping was Re: Measuring backlash more accurately?
Jon Elson
2003-02-20 10:41:36 UTC
Re: [CAD_CAM_EDM_DRO] axis clamps/brakes was Re: Measuring backlash more accurately?
ballendo <ballendo@y...
2003-02-21 03:33:22 UTC
axis clamps/brakes was Re: Measuring backlash more accurately?
Jon Elson
2003-02-21 09:54:08 UTC
Re: [CAD_CAM_EDM_DRO] axis clamps/brakes was Re: Measuring backlash more accurately?
justjuha <juha.keisala@n...
2003-02-24 03:19:36 UTC
Re: Measuring backlash more accurately?
Jon Elson
2003-02-24 10:10:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring backlash more accurately?
Bob Simon
2003-02-24 12:03:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring backlash more accurately?
ballendo <ballendo@y...
2003-02-26 10:36:06 UTC
Mach1 w/ toolchanger? Yes. was Re: Measuring backlash more accurately?
Jon Elson
2003-02-26 22:52:22 UTC
Re: [CAD_CAM_EDM_DRO] Mach1 w/ toolchanger? Yes. was Re: Measuring backlash more accurately?
Art
2003-02-27 10:21:35 UTC
Re: [CAD_CAM_EDM_DRO] Mach1 w/ toolchanger? Yes. was Re: Measuring backlash more accurately?
caudlet <info@t...
2003-02-27 16:30:45 UTC
Mach1 w/ toolchanger? Yes. was Re: Measuring backlash more accurately?
justjuha <juha.keisala@n...
2003-02-28 01:17:30 UTC
Mach1 w/ toolchanger? Yes. was Re: Measuring backlash more accurately?
ballendo <ballendo@y...
2003-03-04 05:59:48 UTC
Mach1 closed loop? sortof-NOW was Mach1 w/ toolchanger? Yes.