Re: Problem

Thanks guys, thats the problem. I goofed up and used the wrong
number set.



-- In CAD_CAM_EDM_DRO@yahoogroups.com, "deanc500"
<deancouillard@s...> wrote:

> Hi, you are reading the pin numbers for the IDC26 connector. Those
> pins are not used in the software setup. The software refers to the
> DB25 pin numbers. The DB25 pins 6 and 7 are for Z step and dir.
> Dean
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "mmurray70"

<mmurray70@n...>

> wrote:
> > I was just setting up TurboCNC to use with my Xylotex board and

the

> > board calls for sterp/dir pins 11 and 13 for the Z axis but

TurboCNC

> > will not allow me to use these pins. What should i do to fix

this?

> > Does it have something to do with port type? What type should it

be

> > on? Please help me out. Thanks.