g320 won't move??

Brian

How are you getting the +5 volt "common" for the step and direction signals
and is that supply "grounded" to the shell of the parport or to any of the
ground pins on the parport connector?

Ray

>    From: "barker806" <barker1@...>
> Subject: g320 won't move??
>
> I have a g320 hooked up and the motor is not moving when I start it
> up. and when I moved the motor shaft the drive "pushes back". so that
> tells me that everything as far as the drive goes is working well. I
> have EMC hooked up to the drive and the motor will not turn?? I have
> checked to output from the computer with a logic probe and the
> computer is sending the step and dir. There is one thing that I don't
> know and that is the jumper settings on the drive. There are places
> for a jumper on the drive but the drive didn't come with any jumpers.
>
> Thank you all for your help
> Brian