RE: [CAD_CAM_EDM_DRO] safety rule
Posted by
Peter Homann
on 2003-04-21 23:49:34 UTC
Hi,
If I'm cutting something repetitive that I know will go smoothly, I usually
try to monitor it by being within ear shot. I find that the noises the mill
is making as it is cutting is a good indication of the state of things. That
way I can be working on something else, rather than staring at the machine,
which I still do from time to time.
Cheers
Peter Homann
mailto:Peter.Homann@...
Adacel Technologies Limited,
250 Bay St, BRIGHTON, 3186, AUSTRALIA
http://www.adacel.com <http://www.adacel.com>
Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960
Mobile 0421-601 665
-----Original Message-----
From: andrewyslee [mailto:andrewlee@...]
Sent: Tuesday, 22 April 2003 4:13 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] safety rule
Hi all,
This list must have hundreds of 1000's hours with automated (CNC)
machines so would be a good place to ask this question (poll).
One of the safety rule says that one should never leave an automated
machine running unattended. But this would negate one of the greatest
advantage of automated machines, and I am sure that (unattended) is
often done.
Just like to find out how list members had fare when they did (leave
cnc machine running unattended).
a. done that numerous times, everything fine
b. done that, and had a very bad experience. The .........
c. Heard that this happened to someone when he/she (any she on this
list?) left the _____ machine running unattended. The .......
d. rules are made to be adhered to strictly
e. rules are made to be broken
etc. etc.
Andrew
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
If I'm cutting something repetitive that I know will go smoothly, I usually
try to monitor it by being within ear shot. I find that the noises the mill
is making as it is cutting is a good indication of the state of things. That
way I can be working on something else, rather than staring at the machine,
which I still do from time to time.
Cheers
Peter Homann
mailto:Peter.Homann@...
Adacel Technologies Limited,
250 Bay St, BRIGHTON, 3186, AUSTRALIA
http://www.adacel.com <http://www.adacel.com>
Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960
Mobile 0421-601 665
-----Original Message-----
From: andrewyslee [mailto:andrewlee@...]
Sent: Tuesday, 22 April 2003 4:13 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] safety rule
Hi all,
This list must have hundreds of 1000's hours with automated (CNC)
machines so would be a good place to ask this question (poll).
One of the safety rule says that one should never leave an automated
machine running unattended. But this would negate one of the greatest
advantage of automated machines, and I am sure that (unattended) is
often done.
Just like to find out how list members had fare when they did (leave
cnc machine running unattended).
a. done that numerous times, everything fine
b. done that, and had a very bad experience. The .........
c. Heard that this happened to someone when he/she (any she on this
list?) left the _____ machine running unattended. The .......
d. rules are made to be adhered to strictly
e. rules are made to be broken
etc. etc.
Andrew
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
andrewyslee
2003-04-21 23:12:50 UTC
safety rule
Tim Goldstein
2003-04-21 23:26:24 UTC
RE: [CAD_CAM_EDM_DRO] safety rule
Peter Homann
2003-04-21 23:49:34 UTC
RE: [CAD_CAM_EDM_DRO] safety rule
turbulatordude
2003-04-22 06:04:58 UTC
Re: safety rule
Kevin Martin
2003-04-22 06:33:25 UTC
RE: [CAD_CAM_EDM_DRO] safety rule
Steve
2003-04-22 07:24:57 UTC
Re: [CAD_CAM_EDM_DRO] safety rule
Marcus and Eva
2003-04-22 07:50:06 UTC
Re: [CAD_CAM_EDM_DRO] safety rule
forumtvm
2003-04-22 09:08:51 UTC
Re: safety rule
Jon Elson
2003-04-22 09:35:23 UTC
Re: [CAD_CAM_EDM_DRO] safety rule
Statman Designs, LLC
2003-04-22 10:13:07 UTC
Re: [CAD_CAM_EDM_DRO] safety rule
turbulatordude
2003-04-22 11:42:42 UTC
Re: safety rule - Intellegent
JanRwl@A...
2003-04-22 13:36:53 UTC
Re: [CAD_CAM_EDM_DRO] safety rule
JanRwl@A...
2003-04-22 14:14:04 UTC
Re: [CAD_CAM_EDM_DRO] safety rule
Marcus and Eva
2003-04-22 21:21:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety rule