CAD CAM EDM DRO - Yahoo Group Archive

Re: creating toolpath..

on 2003-05-18 12:39:04 UTC
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Jens Swales"
><jipeess2000@y...> wrote:
>
> hi group
>
>
>
> i need to find out a conveniant way to create toolpaths for hi-
>gloss
> polishing of glass and marble/granite surfaces (common size is
> 400x600mm).

It's even easier in Dolphin.
You don't even have to darw your toolpath, just the outer shape.
Then if you select area clear you get many, many ways to machine this
just by editing the Area clear box. You can select contour machining,
uni-directional machining, bi- directional machining and by altering
tool overlap and machining angle you have access to literally
hundreds of ways without ever having to draw one toolpath.
pic of the dialog box at:-
http://homepage.ntlworld.com/stevenson.engineers/lsteve/files/area%
20shape.jpg

Again this just goes to show how simple and advanced Dolphin really
is.

John S.

the rule is to never grind/polish the same path twice or
> you will get marks, streaks etc. that will be visible from
> particular angles.
> the work sequence is:
>
> 1st rough miller diamond/nickel grit 60, could be any pattern, it
> just removes the stock
>
> 2nd pre-shaper diamond/nickel grit 120, zig-zag passes to remove
> previous scratches
>
> 3rd grinder diamond/resinbond grit 100, removes previous scratches
in
> a tight spiralshape toolpath
>
> 4rd grinder diamond/resinbond grit 200, removes previous scratches
in
> a less tight spiralshape toolpath
>
> 5th-8th, 500-3000 grit in a random pattern
>
> so far, the results is ok, but takes an awfull time to hack the
code.
> i use a 2d cad to create a pattern for each tool, so its alot of
> copy&paste
>
> it would be sooo easy to just draw my square and hit a key that
> generates the code with all the different tools pre-stored paths
and
> parameters..
>
> g, its difficult to describe in english
>
>
> js

Discussion Thread

Jens Swales 2003-05-18 11:56:07 UTC creating toolpath.. Tim Goldstein 2003-05-18 12:21:36 UTC RE: [CAD_CAM_EDM_DRO] creating toolpath.. stevenson_engineers 2003-05-18 12:39:04 UTC Re: creating toolpath.. Fred Smith 2003-05-18 14:10:02 UTC Re: creating toolpath.. Tim Goldstein 2003-05-18 14:14:40 UTC RE: [CAD_CAM_EDM_DRO] Re: creating toolpath.. Indy123456 2003-05-18 14:46:45 UTC Re: creating toolpath.. Mark Thomas 2003-05-18 15:11:49 UTC RE: [CAD_CAM_EDM_DRO] Re: creating toolpath.. stevenson_engineers 2003-05-18 16:03:35 UTC Re: creating toolpath.. CL 2003-05-18 19:26:39 UTC Re: [CAD_CAM_EDM_DRO] Re: creating toolpath.. Tim Goldstein 2003-05-18 19:32:41 UTC RE: [CAD_CAM_EDM_DRO] Re: creating toolpath.. CL 2003-05-18 20:17:36 UTC Re: [CAD_CAM_EDM_DRO] Re: creating toolpath.. stevenson_engineers 2003-05-19 01:31:02 UTC Re: creating toolpath.. rainnea 2003-05-19 02:02:46 UTC Re: creating toolpath..