CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] http://www.cncmotion.com/

on 2003-05-20 15:16:29 UTC
Hi Peter,

I suspect it requires more then just a CNC lathe! I see what might be a
spindle motor and cutter about to act on the column in one of the
pictures. These cuts, I believe, would require the normal spindle of
the lathe to be sync'd with the carriage move, much the same as cutting
threads.

Just my guess.

Alan KM6VV
P.S. got the invitation; are you running FlashCut?


forumtvm wrote:
>
> Hi,
>
> Anyone knows what cam system (or how to manually program) a lathe to
> produce those beautiful wood turnings featured in the cncmotion site
>
> http://www.cncmotion.com/
>
> in the cnc lathe section?
>
> Peter

Discussion Thread

forumtvm 2003-05-20 14:29:08 UTC http://www.cncmotion.com/ stevenson_engineers 2003-05-20 14:45:35 UTC Re: http://www.cncmotion.com/ Alan Marconett KM6VV 2003-05-20 15:16:29 UTC Re: [CAD_CAM_EDM_DRO] http://www.cncmotion.com/ Fred Smith 2003-05-20 16:05:25 UTC Re: http://www.cncmotion.com/ forumtvm 2003-05-20 16:30:09 UTC Re: http://www.cncmotion.com/ stevenson_engineers 2003-05-20 17:01:43 UTC Re: http://www.cncmotion.com/ glee@i... 2003-05-20 17:26:05 UTC Re: [CAD_CAM_EDM_DRO] Re: http://www.cncmotion.com/ turbulatordude 2003-05-20 19:12:25 UTC Re: http://www. cncmotion. com/ pcfw 2003-05-20 19:19:33 UTC Re: http://www. cncmotion. com/ pcfw 2003-05-20 19:25:01 UTC Re: http://www. cncmotion. com/ Fred Smith 2003-05-20 20:13:59 UTC Re: http://www. cncmotion. com/ pcfw 2003-05-20 20:20:57 UTC Re: http://www. cncmotion. com/ Fred Smith 2003-05-20 20:43:23 UTC Re: http://www. cncmotion. com/ Jeff Demand 2003-05-20 21:05:02 UTC Re: http://www.cncmotion.com/ stevenson_engineers 2003-05-20 23:55:19 UTC Re: http://www.cncmotion.com/ rainnea 2003-05-21 03:22:07 UTC Re: http://www. cncmotion. com/