Re: http://www.cncmotion.com/
Posted by
stevenson_engineers
on 2003-05-20 14:45:35 UTC
Peter, probably just as quick to program these by hand.
Then run that code as a subroutine over again to produce the right
number of spirals.
I see they are agents for Bobcad so they probably use this but having
used Bobcad I stick by my comments above.
A simple spiral program will look like this
N** Z -0.2 F 5.0
N** X 10.0 A 20.0 F25.0
Where the first line feeds the tool into the work and the second line
moves along 10" whist twisting thru 20 degrees.
You then retract the tool, move back to the start in X and index
round to the next position and repeat.
John S.
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "forumtvm" <forumtvm@y...>
wrote:
Then run that code as a subroutine over again to produce the right
number of spirals.
I see they are agents for Bobcad so they probably use this but having
used Bobcad I stick by my comments above.
A simple spiral program will look like this
N** Z -0.2 F 5.0
N** X 10.0 A 20.0 F25.0
Where the first line feeds the tool into the work and the second line
moves along 10" whist twisting thru 20 degrees.
You then retract the tool, move back to the start in X and index
round to the next position and repeat.
John S.
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "forumtvm" <forumtvm@y...>
wrote:
> Hi,to
>
> Anyone knows what cam system (or how to manually program) a lathe
> produce those beautiful wood turnings featured in the cncmotion site
>
> http://www.cncmotion.com/
>
> in the cnc lathe section?
>
> Peter
Discussion Thread
forumtvm
2003-05-20 14:29:08 UTC
http://www.cncmotion.com/
stevenson_engineers
2003-05-20 14:45:35 UTC
Re: http://www.cncmotion.com/
Alan Marconett KM6VV
2003-05-20 15:16:29 UTC
Re: [CAD_CAM_EDM_DRO] http://www.cncmotion.com/
Fred Smith
2003-05-20 16:05:25 UTC
Re: http://www.cncmotion.com/
forumtvm
2003-05-20 16:30:09 UTC
Re: http://www.cncmotion.com/
stevenson_engineers
2003-05-20 17:01:43 UTC
Re: http://www.cncmotion.com/
glee@i...
2003-05-20 17:26:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: http://www.cncmotion.com/
turbulatordude
2003-05-20 19:12:25 UTC
Re: http://www. cncmotion. com/
pcfw
2003-05-20 19:19:33 UTC
Re: http://www. cncmotion. com/
pcfw
2003-05-20 19:25:01 UTC
Re: http://www. cncmotion. com/
Fred Smith
2003-05-20 20:13:59 UTC
Re: http://www. cncmotion. com/
pcfw
2003-05-20 20:20:57 UTC
Re: http://www. cncmotion. com/
Fred Smith
2003-05-20 20:43:23 UTC
Re: http://www. cncmotion. com/
Jeff Demand
2003-05-20 21:05:02 UTC
Re: http://www.cncmotion.com/
stevenson_engineers
2003-05-20 23:55:19 UTC
Re: http://www.cncmotion.com/
rainnea
2003-05-21 03:22:07 UTC
Re: http://www. cncmotion. com/