Aluminium grade
Posted by
zvonponos
on 2003-05-25 08:40:07 UTC
Aluminium grades:
1150 Pure aluminium (used for saucepans, decorative trims, etc)
1200 Similar to 1150 not as good for anodising
5005 Stronger than 1200 suitable for welding
5083 Weldable sheet plate for marine applications & transport vehicles
5251 Medium strength for boats,panneling etc (weldable)
1350 Used for electrical conductors
2011 Machining alloy
2014 High strength heavy duty (aircraft structures)
5083 High strength, weldability in marine, general and transport
6060 Most commonly used extrusion alloy (architectural, etc)
6061 Structual alloy good corrosion resistance
6101 Good strength and electrical conductivity
6106 Medium strength (architectural)
6262 Commerical machining alloy
6351 Medium strength structural alloy
7005 High strength structural alloy for large extrusions
etc.
Temper definitions:
T1 Air cooled extrusion naturally aged
T3 Solution heat treated and cold worked
T5 Air cooled and artificially aged (better mech prop)
T6 Solution heat treated and artificially aged (good)
0 Annealed (this is the softers condition for the alloy)
etc
Regards,
Zvon Ponos
==================================================================
1150 Pure aluminium (used for saucepans, decorative trims, etc)
1200 Similar to 1150 not as good for anodising
5005 Stronger than 1200 suitable for welding
5083 Weldable sheet plate for marine applications & transport vehicles
5251 Medium strength for boats,panneling etc (weldable)
1350 Used for electrical conductors
2011 Machining alloy
2014 High strength heavy duty (aircraft structures)
5083 High strength, weldability in marine, general and transport
6060 Most commonly used extrusion alloy (architectural, etc)
6061 Structual alloy good corrosion resistance
6101 Good strength and electrical conductivity
6106 Medium strength (architectural)
6262 Commerical machining alloy
6351 Medium strength structural alloy
7005 High strength structural alloy for large extrusions
etc.
Temper definitions:
T1 Air cooled extrusion naturally aged
T3 Solution heat treated and cold worked
T5 Air cooled and artificially aged (better mech prop)
T6 Solution heat treated and artificially aged (good)
0 Annealed (this is the softers condition for the alloy)
etc
Regards,
Zvon Ponos
==================================================================
--- In CAD_CAM_EDM_DRO@yahoogroups.com, JanRwl@A... wrote:
> In a message dated 5/24/2003 8:27:36 AM Central Standard Time,
> forumtvm@y... writes:
>
> > So what grade of aluminium should one get for making fittings
> > for home-brewed cnc machines?
> >
>
> SOMEbody "in here" tell us: Isn't there a 7075 (or similar
number) "super
> grade" of aluminum?
>
> Seems 6061-T6 is a "machineable grade", too. I have been told by
an educated
> machinist that the "-T6" suffix means it is GOOD stuff.
>
> Sorry I am NOT a guru! Jan Rowland
>
>
> [Non-text portions of this message have been removed]
Discussion Thread
forumtvm
2003-05-24 06:25:40 UTC
Aluminium grade
Tim Goldstein
2003-05-24 06:58:55 UTC
RE: [CAD_CAM_EDM_DRO] Off Topic: Aluminium grade
turbulatordude
2003-05-24 07:47:13 UTC
Re: Aluminium grade
Robert Campbell
2003-05-24 07:50:26 UTC
Re: [CAD_CAM_EDM_DRO] Aluminium grade
forumtvm
2003-05-24 08:06:09 UTC
Re: Aluminium grade
forumtvm
2003-05-24 09:49:14 UTC
Re: Off Topic: Aluminium grade
Tim Goldstein
2003-05-24 10:10:38 UTC
RE: [CAD_CAM_EDM_DRO] Re: Off Topic: Aluminium grade
forumtvm
2003-05-24 10:28:02 UTC
Re: Off Topic: Aluminium grade
forumtvm
2003-05-24 11:36:35 UTC
Re: Off Topic: Aluminium grade
Tim Goldstein
2003-05-24 13:54:17 UTC
RE: [CAD_CAM_EDM_DRO] Re: Off Topic: Aluminium grade
Jon Elson
2003-05-24 14:40:57 UTC
Re: [CAD_CAM_EDM_DRO] Aluminium grade
Randy Gordon-Gilmore
2003-05-24 17:51:25 UTC
Re: Aluminium grade
Randy Gordon-Gilmore
2003-05-24 18:04:04 UTC
Re: Aluminium grade
JanRwl@A...
2003-05-24 19:15:24 UTC
Re: [CAD_CAM_EDM_DRO] Aluminium grade
Jon Elson
2003-05-24 21:57:08 UTC
Re: [CAD_CAM_EDM_DRO] Aluminium grade
Tim Goldstein
2003-05-24 22:08:27 UTC
RE: [CAD_CAM_EDM_DRO] Off topic: Aluminium grade
zvonponos
2003-05-25 08:40:07 UTC
Aluminium grade
Dan Mauch
2003-05-25 10:36:15 UTC
Dyna 2400 CNC items for auction and my servo conversion
Tim Goldstein
2003-05-25 11:33:34 UTC
FS: 3 - Gecko G320 drives
Tim Goldstein
2003-05-25 12:07:49 UTC
RE: [CAD_CAM_EDM_DRO] FS: 3 - Gecko G320 drives