RE: [CAD_CAM_EDM_DRO] Tuning steppers

First thing to do is upgrade to the most current release and then switch to
using freqmot instead of stepmot. You will find this to be a tremendous
improvement.

Tim
[Denver, CO]

> -----Original Message-----
> From: Stephen Tate [mailto:StephenTate@...]
> Sent: Sunday, March 12, 2000 11:19 AM
> To: CAD_CAM_EDM_DRO@onelist.com
> Subject: [CAD_CAM_EDM_DRO] Tuning steppers
>
>
> From: "Stephen Tate" <StephenTate@...>
>
> I have a Bridgeport Boss which I am driveing using a slow-motion
> controller card and the Novemebr release of EMC. I am having
> problems with missing steps and was wondering what paramiters I might
> need tinker with to resolve the problem.
>
> Any advice?
>
> Steve T.
>
>
>
>
> ------------------------------------------------------------------------
> GET A NEXTCARD VISA, in 30 seconds! Get rates as low as 2.9%
> Intro or 9.9% Fixed APR and no hidden fees. Apply NOW!
> http://click.egroups.com/1/936/1/_/423600/_/952885230/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for
> the discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>