Re: [CAD_CAM_EDM_DRO] Re: SuSE linux and EMC??

Or you could just wipe the current install and install the BDI disk
over it. That might be easiest. Installing a new kernel and rt
extensions isn't hard, but it's a learning experience, and you're
likely to run into some problems the first time.

On Thu, Jun 26, 2003 at 12:04:58AM -0000, Bill wrote:
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Paul <no.spam27@n...> wrote:
> >
> > Hi Bill
> >
> > You didn't mention which version of SuSE is installed - Not that it
> makes too
> > much difference as long as gcc-2.96 is NOT installed. "gcc -v"
> should report
> > 2.95 or 3.2 to be assured of success.
> >
> > You will need to get a virgin kernel source from www.kernel.org
> (would
> > suggest 2.4.20),
> Paul, thanks a bunch! I am using ver. 8.2. When I went to get the
> kernel from the above site I found the following:
>
> ******************
> New to Linux?

--
Paul Amaranth, GCIH | Rochester MI, USA
Aurora Group, Inc. | Security, Systems & Software
paul@... | Unix & Windows