CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: SuSE linux and EMC??

Posted by alex
on 2003-06-26 15:19:33 UTC
Paul,
I'm working on one project with hopes of using EMC for it.
It requires moving X and Y in increments of 1/16 or less fairly fast - say
within
150 ms per each increment, then 50 ms pause.
Do you think this can be achieved or not?
Regards, Alex
----- Original Message -----
From: Paul <no.spam27@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, June 26, 2003 1:16 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: SuSE linux and EMC??


>
> Hi Bill
>
> I believe SuSE-8.2 ships with gcc-3.3 - I have not tried using this
compiler
> for a realtime kernel, nor do I know if it is recommended for the task.
> The reason for using a virgin source is due to the various distributions
> making subtle (and not so subtle) changes to the kernel, either to fix
> percieved problems, or add "enhancements" - Both of which will cause the
> realtime patches to fail at some point.
>
> If you are nervous at the prospect of patching and compiling a kernel,
> perhaps the best thing to try is the new BDI-Live CD. This is still beta
(and
> needs further testing), but it does give you the chance to try EMC without
> trashing your hard drive. It does require a reasonably fast CPU and plenty
of
> memory (600MHz & 128Mb RAM). At present Nvidia video cards are not
supported,
> but this should be fixed by the weekend..
> Download it from http://emc.obstinate.org
>
> Regards, Paul.
>
>
> On Thursday 26 June 2003 1:04 am, Bill wrote:
> > Paul, thanks a bunch! I am using ver. 8.2. When I went to get the
> > kernel from the above site I found the following:
>
> --
> irc channel for EMC users at irc.freenode.org
> /join #emc
> and chat to other users (not many there yet).
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Discussion Thread

Bill 2003-06-25 14:57:57 UTC SuSE linux and EMC?? Paul 2003-06-25 16:05:35 UTC Re: [CAD_CAM_EDM_DRO] SuSE linux and EMC?? Bill 2003-06-25 17:05:03 UTC Re: SuSE linux and EMC?? Paul Amaranth 2003-06-25 18:45:47 UTC Re: [CAD_CAM_EDM_DRO] Re: SuSE linux and EMC?? Vince Negrete 2003-06-25 23:48:46 UTC SuSE linux and EMC?? Paul 2003-06-26 10:18:22 UTC Re: [CAD_CAM_EDM_DRO] Re: SuSE linux and EMC?? alex 2003-06-26 15:19:33 UTC Re: [CAD_CAM_EDM_DRO] Re: SuSE linux and EMC??