Re: oscilloscope for CNC
Posted by
jcc3inc
on 2003-06-28 07:47:58 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "tanyasapa" <tanyasapa@y...>
wrote:
A number of years ago I bought a Tek 545 Scope for the business. It
was a first class instrument with lots of capability (but vacuum
tubes!!). This was later replaced with a used Tek 475 scope. It has
a wider bandwidth, is a lot smaller, and the used price was around
$200. It's fine for what I do (but the spot size is much larger than
the old 545). I think you can find used scopes at a pretty attractive
price.
Regards,
Jack C.
wrote:
> Hi everyone,will
>
> I have a bit of extra money and am considering upgrading my digital
> meter to an oscilloscope :-)
>
> Anyone has any suggestion for the features I should look for, and
> perhaps even the model? I have been using steppers to date, and
> likely upgrade :-) to servo or pseudo-servo later.Dear Sir:
>
> Thanks
>
> Tanya
A number of years ago I bought a Tek 545 Scope for the business. It
was a first class instrument with lots of capability (but vacuum
tubes!!). This was later replaced with a used Tek 475 scope. It has
a wider bandwidth, is a lot smaller, and the used price was around
$200. It's fine for what I do (but the spot size is much larger than
the old 545). I think you can find used scopes at a pretty attractive
price.
Regards,
Jack C.
Discussion Thread
tanyasapa
2003-06-28 04:17:13 UTC
oscilloscope for CNC
jcc3inc
2003-06-28 07:47:58 UTC
Re: oscilloscope for CNC
Harvey White
2003-06-28 09:07:04 UTC
Re: [CAD_CAM_EDM_DRO] oscilloscope for CNC
Jens Swales
2003-06-28 13:28:37 UTC
Re: oscilloscope for CNC
willard5612000
2003-06-28 16:00:50 UTC
Re: oscilloscope for CNC
David A. Frantz
2003-06-28 16:59:48 UTC
Re: [CAD_CAM_EDM_DRO] oscilloscope for CNC
Joe McHam
2003-06-28 17:51:23 UTC
Re: oscilloscope for CNC
turbulatordude
2003-06-28 19:21:36 UTC
Re: oscilloscope for CNC - uses ?
Harvey White
2003-06-28 20:08:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: oscilloscope for CNC
Harvey White
2003-06-28 20:14:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: oscilloscope for CNC - uses ?
David A. Frantz
2003-06-28 20:42:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: oscilloscope for CNC - uses ?
Jon Elson
2003-06-28 21:31:41 UTC
Re: [CAD_CAM_EDM_DRO] oscilloscope for CNC
alex
2003-06-30 15:41:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: oscilloscope for CNC
tanyasapa
2003-06-30 18:01:43 UTC
Re: oscilloscope for CNC
forumtvm
2003-06-30 19:15:54 UTC
Re: oscilloscope for CNC (PICO)
Harvey White
2003-06-30 19:42:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: oscilloscope for CNC
David A. Frantz
2003-06-30 23:13:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: oscilloscope for CNC
Tony Jeffree
2003-06-30 23:14:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: oscilloscope for CNC (PICO)