Re: [CAD_CAM_EDM_DRO] I made it go! (Newb questions)
Posted by
sam sokolik
on 2003-07-07 08:13:35 UTC
http://www.cs.uiowa.edu/~jones/step/
This is a good tutorial on stepping motors
sam
ghidera2000 <ghidera2000@...> wrote:
I finally got around to actually setting up a stepper motor and
making it go. It actually goes - you wouldn't believe how amazed I
am :D
I am facing a problem thats probably pretty common. The datasheets
for my ST35 motor don't mention wire colour codes or step sequence.
http://www.mingjong.com.tw/product_e.htm
I know I saw a web page that described how to determine the wiring
and step sequence for any unipolar motor - now I can't find it. I
did find one that partially explains it at:
http://redbaron.bishops.ntc.nf.ca/intsys1215/vbreferences/vb-
webpage/stepper.htm
So I know which ones are center taps and can group two sets of three
wires - but I don't know which ones are for coil 1, 2 etc.
I've been fumbling with different step sequences and mixing and
matching the wires (seems to work almost no matter what I do!). How
can I determine the proper step sequence etc?
P.S. I did email the manufacturer but I'm not holding my breath on
that...
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
[Non-text portions of this message have been removed]
This is a good tutorial on stepping motors
sam
ghidera2000 <ghidera2000@...> wrote:
I finally got around to actually setting up a stepper motor and
making it go. It actually goes - you wouldn't believe how amazed I
am :D
I am facing a problem thats probably pretty common. The datasheets
for my ST35 motor don't mention wire colour codes or step sequence.
http://www.mingjong.com.tw/product_e.htm
I know I saw a web page that described how to determine the wiring
and step sequence for any unipolar motor - now I can't find it. I
did find one that partially explains it at:
http://redbaron.bishops.ntc.nf.ca/intsys1215/vbreferences/vb-
webpage/stepper.htm
So I know which ones are center taps and can group two sets of three
wires - but I don't know which ones are for coil 1, 2 etc.
I've been fumbling with different step sequences and mixing and
matching the wires (seems to work almost no matter what I do!). How
can I determine the proper step sequence etc?
P.S. I did email the manufacturer but I'm not holding my breath on
that...
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---------------------------------
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
[Non-text portions of this message have been removed]
Discussion Thread
ghidera2000
2003-07-06 13:39:55 UTC
I made it go! (Newb questions)
JanRwl@A...
2003-07-06 13:54:42 UTC
Re: [CAD_CAM_EDM_DRO] I made it go! (Newb questions)
turbulatordude
2003-07-06 14:48:14 UTC
Re: I made it go! (Newb questions)
ghidera2000
2003-07-06 15:16:59 UTC
Re: I made it go! (Newb questions)
JanRwl@A...
2003-07-06 19:12:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: I made it go! (Newb questions)
sam sokolik
2003-07-07 08:13:35 UTC
Re: [CAD_CAM_EDM_DRO] I made it go! (Newb questions)
ghidera2000
2003-07-07 08:18:19 UTC
Re: I made it go! (Newb questions)
sam sokolik
2003-07-07 21:51:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: I made it go! (Newb questions)
ghidera2000
2003-07-08 08:39:40 UTC
Re: I made it go! (Newb questions)