CAD CAM EDM DRO - Yahoo Group Archive

Re: digitizer arm?

Posted by doug98105
on 2003-07-23 06:33:56 UTC
Hi Roger,

Where did you buy the Microscribe, approx cost, etc?

How are you using it, software, etc?

thanks,

Doug




--- In CAD_CAM_EDM_DRO@yahoogroups.com, "vrsculptor"
<vrsculptor@h...> wrote:
> Sorry, can't help with the arm. I gave up and bought a
microscribe.
> The challenge isn't the arm as much as getting the point cloud
data
> into a usable model. You might want to investigate that before you
> build a digitizer. Take a look at points2poly and do some searches
> on point cloud in this newsgroup.
>
> Roger S.

Discussion Thread

the_punisher_454 2003-07-22 17:21:03 UTC digitizer arm? vrsculptor 2003-07-22 18:41:58 UTC Re: digitizer arm? doug98105 2003-07-23 06:33:56 UTC Re: digitizer arm? vrsculptor 2003-07-23 13:58:48 UTC Re: digitizer arm? Bill Kichman 2003-07-24 21:42:46 UTC Re: [CAD_CAM_EDM_DRO] Re: digitizer arm? the_punisher_454 2003-07-25 07:56:50 UTC Re: digitizer arm? vrsculptor 2003-07-25 08:03:55 UTC Re: digitizer arm? Bill Kichman 2003-07-25 09:39:44 UTC Re: [CAD_CAM_EDM_DRO] Re: digitizer arm? Harvey White 2003-07-25 12:01:47 UTC Re: [CAD_CAM_EDM_DRO] Re: digitizer arm? rainnea 2003-07-27 11:09:52 UTC Re: digitizer arm?