Re: glueing teflon and such
Posted by
grantfair2001
on 2003-08-07 19:37:08 UTC
Dave-
Would this work?
http://www.leevalley.com/wood/page.asp?SID=&ccurrency=1&page=32182&category=1,110,43466
Alternatively, how about DriCote Lubricant. It's like a spray on teflon
which adheres to metal. (also on Lee Vallee website).
Grant
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<davemucha@j...> wrote:
Would this work?
http://www.leevalley.com/wood/page.asp?SID=&ccurrency=1&page=32182&category=1,110,43466
Alternatively, how about DriCote Lubricant. It's like a spray on teflon
which adheres to metal. (also on Lee Vallee website).
Grant
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<davemucha@j...> wrote:
> Hi all,
>
> I am looking at a linear slide and want to use some HDPE or Teflon as
> the bearing surface material.
>
> For this, I was looking at getting some 1/16 sheet and slicing up the
> sections I need, then using some sort of adhesive, to glue them to
> some aluminum.
>
> Of course the first question is surface prep. if teflon is a non-
> stick, how do you get it to stick ?
>
> There will be very little pressure on this as it is more for
> postioning than pressures involved in cutting.
>
> am thinking about hard anodizing the aluminum before assembly and
> need to find out more about surface conditions. Like, does anodizing
> raise the surface and make for a rougher surface ?
>
> Any ideas ?
>
> Dave
Discussion Thread
turbulatordude
2003-08-07 18:45:53 UTC
glueing teflon and such
Jim Geib
2003-08-07 19:28:47 UTC
Re: [CAD_CAM_EDM_DRO] glueing teflon and such
grantfair2001
2003-08-07 19:37:08 UTC
Re: glueing teflon and such
WUKSTA
2003-08-07 20:44:27 UTC
Re: glueing teflon and such
carlos_is_love
2003-08-07 22:07:26 UTC
Re: glueing teflon and such
JanRwl@A...
2003-08-07 22:10:22 UTC
Re: [CAD_CAM_EDM_DRO] glueing teflon and such
Tim Goldstein
2003-08-07 22:20:26 UTC
RE: [CAD_CAM_EDM_DRO] glueing teflon and such
snuffman5994
2003-08-08 14:59:04 UTC
Re: glueing teflon and such
s l
2003-08-08 14:59:48 UTC
Re: [CAD_CAM_EDM_DRO] glueing teflon and such
turbulatordude
2003-08-08 20:01:47 UTC
Re: glueing teflon and such - anodizing
ballendo
2003-08-08 23:43:49 UTC
A slide idea was Re: gluing teflon and such - anodizing
turbulatordude
2003-08-09 07:57:46 UTC
A slide idea was Re: gluing teflon and such - anodizing
echnidna
2003-08-11 02:02:38 UTC
Re: glueing teflon and such