Re: glueing teflon and such

Don't know about the aluminum, but mcmaster sells bondable teflon in
various thicknesses and sheet sizes. The catalog page is 3302. I use
it all the time with an epoxy resin, and never have any problems.

-carlos

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<davemucha@j...> wrote:

> Hi all,
>
> I am looking at a linear slide and want to use some HDPE or Teflon

as

> the bearing surface material.
>
> For this, I was looking at getting some 1/16 sheet and slicing up

the

> sections I need, then using some sort of adhesive, to glue them to
> some aluminum.
>
> Of course the first question is surface prep. if teflon is a non-
> stick, how do you get it to stick ?
>
> There will be very little pressure on this as it is more for
> postioning than pressures involved in cutting.
>
> am thinking about hard anodizing the aluminum before assembly and
> need to find out more about surface conditions. Like, does

anodizing

> raise the surface and make for a rougher surface ?
>
> Any ideas ?
>
> Dave