Re: Ballnut Nut Tap Source
Posted by
ballendo
on 2003-09-10 07:43:37 UTC
Hello,
Travers is where I get these sorts of seldom used taps. The 15/16-16
is only 24 bucks. Part number 14-060-xxx (use 161 for taper,162 for
plug, and 163 for bottoming, in place of the xxx)
www.travers.com
Hope this helps,
Ballendo
P.S. A 15/16 hole (use a spade bit; or a forstner if ya got one)
drilled through an 8/4 block of hardwood; i.e, closed cell like
Birch, cherry or maple, will align the tap for a square entrance...
You can "size a spade bit easily with a file or grinder to get the
hole the exact size needed to hold the tap accurately...
Travers is where I get these sorts of seldom used taps. The 15/16-16
is only 24 bucks. Part number 14-060-xxx (use 161 for taper,162 for
plug, and 163 for bottoming, in place of the xxx)
www.travers.com
Hope this helps,
Ballendo
P.S. A 15/16 hole (use a spade bit; or a forstner if ya got one)
drilled through an 8/4 block of hardwood; i.e, closed cell like
Birch, cherry or maple, will align the tap for a square entrance...
You can "size a spade bit easily with a file or grinder to get the
hole the exact size needed to hold the tap accurately...
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "C.S. Mo" <cs@v...> wrote:
> Does anyone know if there's anywhere to buy either a tap or a nut
for a
> 5/8" Ballnut? It is a 15/16-16 thread which is a little bit of an
unusual
> size. Or is my best option to buy a flange (at $23 w/o shipping!)
and
> mill it to the right size?
>
> Thanks,
>
> --C.S.
Discussion Thread
Thomas Powell
2003-09-06 07:44:02 UTC
CAD software
dougfennell2000
2003-09-06 07:58:15 UTC
Re: CAD software
Raymond Heckert
2003-09-07 14:37:09 UTC
Re: [CAD_CAM_EDM_DRO] CAD software
Mariss Freimanis
2003-09-07 14:49:34 UTC
Re: CAD software
wanliker@a...
2003-09-07 15:29:03 UTC
Re: [CAD_CAM_EDM_DRO] CAD software
ghidera2000
2003-09-07 19:26:37 UTC
Re: CAD software
stevenson_engineers
2003-09-08 04:26:30 UTC
Re: CAD software
Michael Milligan
2003-09-08 07:48:41 UTC
RE: [CAD_CAM_EDM_DRO] Re: CAD software
Thomas Powell
2003-09-09 07:44:05 UTC
Re: [CAD_CAM_EDM_DRO] CAD software
Thomas Powell
2003-09-09 07:44:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: CAD software
Keith Bowers
2003-09-09 09:03:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: CAD software
glee@i...
2003-09-09 09:31:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: CAD software (Dolphin CAD/CAM)
John Guenther
2003-09-09 09:46:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: CAD software (Dolphin CAD/CAM)
glee@i...
2003-09-09 09:57:32 UTC
RE: [CAD_CAM_EDM_DRO] Re: CAD software (Dolphin CAD/CAM)
C.S. Mo
2003-09-09 10:16:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: CAD software
Keith Bowers
2003-09-09 10:37:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: CAD software (Dolphin CAD/CAM)
C.S. Mo
2003-09-09 11:10:10 UTC
Ballnut Nut
Tim Goldstein
2003-09-09 11:42:35 UTC
RE: [CAD_CAM_EDM_DRO] Ballnut Nut
stevenson_engineers
2003-09-09 11:47:50 UTC
Re: CAD software
jeffalanp
2003-09-09 11:57:04 UTC
Re: Ballnut Nut
C.S. Mo
2003-09-09 12:18:55 UTC
RE: [CAD_CAM_EDM_DRO] Ballnut Nut
turbulatordude
2003-09-09 14:08:58 UTC
Re: Ballnut Nut
Kim Lux
2003-09-09 14:12:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Ballnut Nut
C.S. Mo
2003-09-09 14:58:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Ballnut Nut
turbulatordude
2003-09-09 15:56:57 UTC
Re: Ballnut Nut
JanRwl@A...
2003-09-09 17:13:50 UTC
Re: [CAD_CAM_EDM_DRO] Ballnut Nut
Randy Gordon-Gilmore
2003-09-09 17:33:20 UTC
Icad 2000, was Re: CAD software
Bill Kichman
2003-09-09 18:13:03 UTC
Re: [CAD_CAM_EDM_DRO] Ballnut Nut
stevenson_engineers
2003-09-09 18:46:18 UTC
Icad 2000, was Re: CAD software
rawen2
2003-09-09 20:53:57 UTC
Icad 2000, was Re: CAD software
Randy Gordon-Gilmore
2003-09-09 22:33:07 UTC
Re: [CAD_CAM_EDM_DRO] Icad 2000, was Re: CAD software
Randy Gordon-Gilmore
2003-09-09 22:47:49 UTC
Re: Icad 2000, was Re: CAD software
rawen2
2003-09-09 23:15:53 UTC
Icad 2000, was Re: CAD software
Michael Milligan
2003-09-10 07:34:16 UTC
RE: [CAD_CAM_EDM_DRO] Re: CAD software (Dolphin CAD/CAM)
Michael Milligan
2003-09-10 07:34:27 UTC
RE: [CAD_CAM_EDM_DRO] Re: CAD software
Kim Lux
2003-09-10 07:41:11 UTC
Re: [CAD_CAM_EDM_DRO] Ballnut Nut: clarification
ballendo
2003-09-10 07:43:37 UTC
Re: Ballnut Nut Tap Source
mayfieldtm
2003-09-10 08:04:19 UTC
Re: Ballnut Nut
Keith Bowers
2003-09-10 08:05:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: CAD software (Dolphin CAD/CAM)
Michael Milligan
2003-09-10 10:18:52 UTC
RE: [CAD_CAM_EDM_DRO] Re: Dolphin CAD/CAM HELP / Tutorial Files
Thomas Powell
2003-09-10 15:09:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: CAD software (Dolphin CAD/CAM)
Thomas Powell
2003-09-10 15:11:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: CAD software (Dolphin CAD/CAM)
Keith Bowers
2003-09-10 16:10:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: CAD software (Dolphin CAD/CAM)