RE: [CAD_CAM_EDM_DRO] Better servo performance: Ameteks at 60V,80V ?

Go to my web site and click on the Whats New and click on the links for
the brushless servo motors and the brushless, servo amp
No the brushless motors will not operate off the G320 because they are
PMDC Brush type servo amps. Interestingly, the Brushless servo amp will
work with either a brushelss or a brushed motor.
Dan

-----Original Message-----
From: Kim Lux [mailto:lux@...]
Sent: Wednesday, September 10, 2003 10:08 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Better servo performance: Ameteks at
60V,80V ?


Tell me more, Dan. We will be building several more CNC machines in the
near future. We can take this off line if you want.

Will Gecko 320s drive brushless motors ?

Kim

On Wed, 2003-09-10 at 11:03, Dan Mauch wrote:
> I came across some brushless Kollmorgen 762 oz in servo motors rated
> at 4500 RPM and are a drop in replacement for a nema34 stepper motor.
> The motors are rated at .9HP. They are new and I have some step and
> direction brushless servo amps rated at 23A Peak 11Amps continous
> 24-80VDC. They are awesome.
> My prices will be dirt cheap compared to list of even some of the ebay
> prices I have seen. All are new in factory cartons. See my web site at
> www.seanet.com/~dmauch in about three days where I will give more
> spscifics and pricing.
> Dan
> -----Original Message-----
> From: Kim Lux [mailto:lux@...]
> Sent: Wednesday, September 10, 2003 9:22 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Better servo performance: Ameteks at 60V,
80V
> ?
>
>
> High people.
>
> We've got Ametek servo motors on some of our CNC equipment.
> Everything work well, but we are limited to 150 IPM. We'd like our
> rapid speeds to be faster, something closer to 400 IPM.
>
> Does anyone know of servo motors with about 600 OZ In torque (peak),
> reasonable size and a top speed of about 2000 RPM, with a reasonable
> price tag ?
>
> There is nothing wrong with the Ameteks except that they are only
> rated for 900 RPM with a 40 Volt supply. I'm wondering how they would

> run with a 60 or 80V supply. Right now they run cool all the time,
> whether running fast or slow, even under heavy cuts. We have plenty
of cutting
> power.
>
> The only problem we have is that at high rapid speeds (motor RPM 800+)

> they run out of power, probably due to the fact that their no load
> speed is 900 RPM from a 40 V supply. If we ran them from a 60V
> supply, we could probably get 1350 RPM or 225IPM and 80V would yield
> 300 IPM or so, which would be a big step in the right direction.
>
> Has anyone tried this ?
>
> BTW: setup is Ameteks, 5 TPI ballscrews, Gecko 320s, 40V supply,
> direct drive, ie no belt reduction.
>
>
> Thanks
--
Kim Lux <lux@...>

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/