CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] CNCing the knee axis...

Posted by Weyland
on 2003-09-24 07:50:50 UTC
On Wednesday 24 September 2003 10:39 am, Kim Lux spake:

> Does this mean that CNCing the knee is not a good thing to do ?

Not at all.
Just know what your limitations are
ahead of time and what to expext afterwards.

> Should
> I just CNC the quill and leave the knee alone ?

Not necessarily.
It's really up to you.

*PERSONALLY*, if you've got enough travel in your quill, I wouldn't bother.

The thing is, there *are* some times that moving a knee is very handy,
like clearing odd shaped workpieces, fixturing, and hold-downs.
It would be very easy to call the knee a fourth axis and integrate a clamping
signal much like a spindle brake.

> knee lock off
> move knee up 8.750"
> knee lock on
> continue machining

I don't see why EMC couldn't handle it... <grins>

Best,

Weyland

Discussion Thread

protman16 2003-09-24 04:50:25 UTC Machine flex; How much is to much? Kim Lux 2003-09-24 06:16:31 UTC CNCing the knee axis... Weyland 2003-09-24 07:19:44 UTC Re: [CAD_CAM_EDM_DRO] CNCing the knee axis... Kim Lux 2003-09-24 07:38:28 UTC Re: [CAD_CAM_EDM_DRO] CNCing the knee axis... mayfieldtm 2003-09-24 07:47:09 UTC Re: Machine flex; How much is to much? Weyland 2003-09-24 07:50:50 UTC Re: [CAD_CAM_EDM_DRO] CNCing the knee axis... Tim Goldstein 2003-09-24 07:58:05 UTC RE: [CAD_CAM_EDM_DRO] CNCing the knee axis... Leslie M. Watts 2003-09-24 08:24:58 UTC RE: [CAD_CAM_EDM_DRO] Re: Machine flex; How much is to much? Peter R 2003-09-24 08:36:44 UTC Re: [CAD_CAM_EDM_DRO] CNCing the knee axis... Dan Mauch 2003-09-24 09:21:16 UTC RE: [CAD_CAM_EDM_DRO] CNCing the knee axis... barker806 2003-09-24 09:22:05 UTC Re: CNCing the knee axis... Marv Frankel 2003-09-24 09:40:27 UTC Re: [CAD_CAM_EDM_DRO] CNCing the knee axis... Jon Elson 2003-09-24 10:16:44 UTC Re: [CAD_CAM_EDM_DRO] Machine flex; How much is to much? Jon Elson 2003-09-24 10:23:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Machine flex; How much is to much? Alan Marconett KM6VV 2003-09-24 10:29:23 UTC Re: [CAD_CAM_EDM_DRO] Machine flex; How much is to much? R Rogers 2003-09-24 12:07:15 UTC Re: [CAD_CAM_EDM_DRO] Machine flex; How much is to much? Kim Lux 2003-09-24 12:57:24 UTC RE: [CAD_CAM_EDM_DRO] CNCing the knee axis... Kim Lux 2003-09-24 13:01:32 UTC Re: [CAD_CAM_EDM_DRO] CNCing the knee axis... Kim Lux 2003-09-24 13:05:45 UTC Re: [CAD_CAM_EDM_DRO] Re: CNCing the knee axis... barker806 2003-09-24 13:18:03 UTC Re: CNCing the knee axis... Kim Lux 2003-09-24 13:26:57 UTC Re: [CAD_CAM_EDM_DRO] Re: CNCing the knee axis... barker806 2003-09-24 16:40:25 UTC Re: CNCing the knee axis... Jon Elson 2003-09-24 21:23:31 UTC Re: [CAD_CAM_EDM_DRO] Re: CNCing the knee axis... protman16 2003-09-25 04:35:24 UTC Re: Machine flex; How much is to much? protman16 2003-09-25 04:44:47 UTC Re: Machine flex; How much is to much? protman16 2003-09-25 04:47:30 UTC Re: Machine flex; How much is to much? Jon Elson 2003-09-25 10:08:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Machine flex; How much is to much? protman16 2003-09-25 10:51:57 UTC Re: Machine flex; How much is to much? Jim Brown 2003-09-25 22:38:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Machine flex; How much is to much? R Rogers 2003-09-26 07:10:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Machine flex; How much is to much? m0nkey0ne 2003-09-26 11:19:48 UTC Re: Machine flex; How much is to much?