Re: [CAD_CAM_EDM_DRO] RF Shielding - was Re: Router spindle electrical noise.

> it's copper braid but i guess should work?
> I just seen it in there catalog

what about heat shrink or insulating tube over that. you might even be able to go back to the foil idea.

a full faraday cage is more resistant than partial if i remember right.

most controls ground the shield on the controller side only, motor side
of the shield floats. is that the case with your machine?


Regards
C Cowley

On Mon, 2003-10-20 at 22:36, jimalb2309 wrote:
> You could also try allelectronics.com
>
> http://www.allelectronics.com/cgi-bin/category.cgi?
> category=825900&type=store
>
> incase link not work
> www.allelectronics.com
> under wire -> tubular braid
> it's copper braid but i guess should work?
> I just seen it in there catalog
>
> - In CAD_CAM_EDM_DRO@yahoogroups.com, "c_holm10017" <cholm@m...>
> wrote:
> > I have been chasing similar RF interference problems with my CNC
> > conversion Sherline, and wonder whether anyone has a source of
> braid
> > to put over cables? I spent some time making my cables, and would
> > prefer to put a shield over them, rather than re-doing them. (the
> > aluminum foil seems to help but it looks terrible and is very
> > fragile.)
> >
> > If not, any place that has reasonably priced 4 conductor braid
> > shielded cable with wires bigger than 22 gage?
> >
> > Thanks in advance.
> >
> > Chris
> >
> <snip>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>