CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: 3D Text Carving

on 2003-11-06 16:23:38 UTC
Carl,

Would it be suitible to convert like jpegs into a raster toolpath?

Do you need special libraries, or are standard linux libraries ok?

Geert

Carl Mikkelsen wrote:
> Don,
>
> My raster-to-toolpath code is written in C, and uses some GPL-style raster
> image libraries. It could be available -- it is available on my internal
> CVS server. I support ssh connections to the cvs server.
>
> Are you a developer? With the ".edu" address, I imagine that you are a
> programmer.
>
> If you are a user, it currently runs under Linux. It could also compile as
> a Windows console ap.
>
> It currently supports two algorithms -- an edge walking algorithm and a
> raster-cutting algorithm. When the tool path is determined, there is a
> subsequent optimization pass to reduce the time needed to cut the image.
>
> -- Carl
>
> At 09:59 AM 11/5/2003 -0500, you wrote:
>
>>What software is that. Is it freely available?
>>If so where?
>>
>>thanks
>>
>>Don
>>dkelley@...
>>
>>-----Original Message-----
>>From: Carl Mikkelsen [mailto:cmm@...]
>>Sent: Tuesday, November 04, 2003 11:41 AM
>>To: CAD_CAM_EDM_DRO@yahoogroups.com
>>Subject: Re: [CAD_CAM_EDM_DRO] Re: 3D Text Carving
>>
>>
>>My raster-to-tool-path code will do that. It works from a description of
>>the tool profile, so it will work for V bits, ball-end bits, and square bits.
>>
>>You use photoshop, GIMP, or some other tool to place the text, then convert
>>it to my tool-path file. It *should" be easy to convert to G-code -- and I
>>volunteer to write it -- if someone will send me a G-code tutorial and test
>>the results.
>>
>>-- Carl
>>
>>
>>Addresses:
>>FAQ: http://www.ktmarketing.com/faq.html
>>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>
>>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>>timg@...
>>Moderator: pentam@... indigo_red@... [Moderators]
>>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>
>>OFF Topic POSTS: General Machining
>>If you wish to post on unlimited OT subjects
>>goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>>reach it if you have trouble.
>>http://www.metalworking.com/news_servers.html
>>
>>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>>sister site to the CCED group, as many of the same members are there, for
>>OT subjects, that are not allowed on the CCED list.
>>
>>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>>bill
>>List Mom
>>List Owner
>>
>>
>>
>>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>

Discussion Thread

d_bobzien 2003-11-03 19:06:55 UTC 3D Text Carving Robert Campbell 2003-11-03 20:06:15 UTC Re: [CAD_CAM_EDM_DRO] 3D Text Carving ballendo 2003-11-04 04:20:57 UTC Re: 3D Text Carving jcc3inc 2003-11-04 05:53:04 UTC Re: 3D Text Carving James Cullins 2003-11-04 06:40:15 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D Text Carving Fred Smith 2003-11-04 08:06:04 UTC Re: 3D Text Carving Carl Mikkelsen 2003-11-04 08:56:50 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D Text Carving d_bobzien 2003-11-04 19:32:16 UTC Re: 3D Text Carving d_bobzien 2003-11-04 19:33:49 UTC Re: 3D Text Carving Tim Goldstein 2003-11-04 21:01:01 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D Text Carving Fred Smith 2003-11-05 05:30:40 UTC Re: 3D Text Carving Donald Kelley 2003-11-05 06:59:11 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D Text Carving david scott 2003-11-05 07:41:12 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D Text Carving Carl Mikkelsen 2003-11-05 17:57:49 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D Text Carving Geert De Pecker 2003-11-06 16:23:38 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D Text Carving Carl Mikkelsen 2003-11-07 10:59:26 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D Text Carving Donald Kelley 2003-11-07 11:37:59 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D Text Carving