Re: [CAD_CAM_EDM_DRO] 3D Text Carving

Don,

There are several programs on the market that will V carve letters.

I have used AlphaCam for a number of years. ArtCam should do it also.

VisualMill 5.0 which was just released will do it.

If you need a test done with VisualMill, I sell VisualMill and I would be
glad to test it for you.

Bob Campbell

----- Original Message -----
From: "d_bobzien" <d_bobzien@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, November 03, 2003 4:54 PM
Subject: [CAD_CAM_EDM_DRO] 3D Text Carving


> Can anyone recommend a program that will produce g code for text
> using a v cutter bit? I'm looking for something that will raise /
> lower the bit based on the text width. I'm using Mach2 as a
> controller if that matters. Thanks in advance for any advice. Don
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>