Re: [CAD_CAM_EDM_DRO] SS Relays

Jack
What breakout board do you have? If it is the Sound Logic board just hook
up the
+ terminal of the SSR to the +12v terminal of the output terminal and the _
side to the
out terminal. You can get them in Digikey, Jameco, Mouser, BGMicro may have
them.
If you need I can get you some part #s.
Jim

----- Original Message -----
From: "Jack Hoffa" <jack.darlene.hoffa@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, November 20, 2003 3:43 PM
Subject: [CAD_CAM_EDM_DRO] SS Relays


> Help!
> Non_Electrical guy needs advice for specific types and Where to get
> SSR's for Spindle motor on-Off, Flood and mist control, etc.
>
> Thanks so very much
> Jack Hoffa
>
> P.S. Any schematics and advice would also help - I need very
> detailed help.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>