Re: [CAD_CAM_EDM_DRO] Re: servo board

Hi,

As I mentioned earlier I’m NOT an expert on servos or servo drivers BUT, Isn’t it quite simple to setup the Gecko to communicate with the computer to, if you so desire? I don’t know if its vise or not, but it’s possible, I have seen it somewhere on the net.

Regards,
Eze

>
>
>
> There are alternatives to the STG card...
> Vigilant do a couple - The ISA version is comparable in price to
> STG, the
> PCI
> version quite a bit more expensive.
> Sensoray have a six axis PCI card that undercuts the price of STG by
> a fair
>
> bit. But the DACs use an I2C bus wich might cause problems if you don't
> have
> a driver for it.
> Vital Systems are currently developing a PCI card - As yet, I do not
> have
> any
> pricing or technical details.
>
> Regards, Paul.
>
>
> On Friday 28 November 2003 4:11 pm, mikezcnc wrote:
> > If you look at picosystems site then you will notice that he is
> > showing a schematic how to connect a board from the other website you
> > have mentioned...
> >
> > However, $800 for a servo? I see no point of spending that much when
> > you can get a Gecko for less. I would say that if the ISA servo
> > controller guy were smart he would drop his price to $400 and that
> > would put Gecko next day in receivership...
> > gecko costs around $150 per axis.
> > Oh, another thing, if you have to have more than 3 axis than it is a
> > different calculation.
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> > timg@... Moderator: pentam@... indigo_red@...
> > [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if
> > you have trouble. http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> > sister site to the CCED group, as many of the same members are there, for
> > OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
> --
> irc channel for EMC users at irc.freenode.org
> /join #emc
> and chat to other users (not many there yet).
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are
> there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>

..............................................................
Lähetä oikeat joulukortit omalla kuvallasi! Maikkarin netissä.
http://www.mtv3.fi/postikortit/