Re: [CAD_CAM_EDM_DRO] e-stop / limit switch help needed

Jeff,

How are you powering your spindle?

Bob Campbell
http://www.campbelldesigns.com
Breakout Boards
VisualMill 5.0 basic
Stepper motors
Plasma Torch Height, THC 300 boards

----- Original Message -----
From: "ja_erickson" <ja_erickson@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, January 10, 2004 5:31 PM
Subject: [CAD_CAM_EDM_DRO] e-stop / limit switch help needed


> hey all,
>
> is there anybody out there that has an e-stop circuit schematic
> that will kill the spindle, as well as disable gecko 320
> drives simultaneously?
> and
> is there anybody out there that has a limit switch schematic
> that will that will kill the spindle as well as disable gecko 320
> drives simultaneously?
>
> using mach2
>
> any help is cool
> thanks
> jeff
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>