Re: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
Posted by
Bob McKnight
on 2004-01-14 19:19:08 UTC
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
From: "Peter Homann" <peter.homann@...>
Date sent: Thu, 15 Jan 2004 12:22:24 +1100
Subject: [CAD_CAM_EDM_DRO] Is a reduction drive
necessary for servo motors?
Send reply to: CAD_CAM_EDM_DRO@yahoogroups.com
[ Double-click this line for list subscription options ]
Peter
It looks like you would have to know the number of steps
per revolution of both the stepper and the Servo. I am
not sure how the servos are rated , but the steppers are
usually rated in degrees per step or steps per revolution.
I have been led to believe that steppers tend offer a smaller
incremental movement than Servos
Bob McKnight
Hi,
I'm looking at upgrading a CNC lathe that currently has 210 oz/in
steppers to servo motors.
The servo motors are rated at just over 300 oz/in.
The current stepper set-up is direct coupled using zero backlash
flexible couplers. The ball screws have a lead of 4mm/turn.
As the servos appear to be more powerful than the steppers, I feel I
should be able to do a direct replacement, but have not used servos
before.
Do I need to use any gear reduction, or can I direct couple the servos
via the flexible coupling as is done with the existing steppers.
Any help or comments appreciated.
Thanks,
Peter Homann
mailto:Peter.Homann@...
Adacel Technologies Limited,
250 Bay St, BRIGHTON, 3186, AUSTRALIA
http://www.adacel.com <http://www.adacel.com>
Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960
Mobile 0421-601 665
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@...,
timg@... Moderator: pentam@...
indigo_red@... davemucha@... [Moderators] URL to
this
group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble. http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
DOMAIN BY POSTING
THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........
bill List Mom List Owner
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
To unsubscribe from this group, send an email to:
CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
From: "Peter Homann" <peter.homann@...>
Date sent: Thu, 15 Jan 2004 12:22:24 +1100
Subject: [CAD_CAM_EDM_DRO] Is a reduction drive
necessary for servo motors?
Send reply to: CAD_CAM_EDM_DRO@yahoogroups.com
[ Double-click this line for list subscription options ]
Peter
It looks like you would have to know the number of steps
per revolution of both the stepper and the Servo. I am
not sure how the servos are rated , but the steppers are
usually rated in degrees per step or steps per revolution.
I have been led to believe that steppers tend offer a smaller
incremental movement than Servos
Bob McKnight
Hi,
I'm looking at upgrading a CNC lathe that currently has 210 oz/in
steppers to servo motors.
The servo motors are rated at just over 300 oz/in.
The current stepper set-up is direct coupled using zero backlash
flexible couplers. The ball screws have a lead of 4mm/turn.
As the servos appear to be more powerful than the steppers, I feel I
should be able to do a direct replacement, but have not used servos
before.
Do I need to use any gear reduction, or can I direct couple the servos
via the flexible coupling as is done with the existing steppers.
Any help or comments appreciated.
Thanks,
Peter Homann
mailto:Peter.Homann@...
Adacel Technologies Limited,
250 Bay St, BRIGHTON, 3186, AUSTRALIA
http://www.adacel.com <http://www.adacel.com>
Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960
Mobile 0421-601 665
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@...,
timg@... Moderator: pentam@...
indigo_red@... davemucha@... [Moderators] URL to
this
group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble. http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
DOMAIN BY POSTING
THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........
bill List Mom List Owner
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
To unsubscribe from this group, send an email to:
CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Discussion Thread
ja_erickson
2004-01-10 17:31:46 UTC
e-stop / limit switch help needed
Robert Campbell
2004-01-10 17:44:01 UTC
Re: [CAD_CAM_EDM_DRO] e-stop / limit switch help needed
ja_erickson
2004-01-10 18:50:13 UTC
Re: e-stop / limit switch help needed
james_cullins@s...
2004-01-10 20:39:37 UTC
Re: [CAD_CAM_EDM_DRO] e-stop / limit switch help needed
Peter Homann
2004-01-14 17:22:26 UTC
Is a reduction drive necessary for servo motors?
JanRwl@A...
2004-01-14 18:50:13 UTC
Re: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
Bob McKnight
2004-01-14 19:19:08 UTC
Re: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
Peter Homann
2004-01-14 19:46:30 UTC
RE: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
Peter Homann
2004-01-14 19:58:59 UTC
RE: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
JanRwl@A...
2004-01-14 20:02:01 UTC
Re: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
Peter Homann
2004-01-14 20:25:31 UTC
RE: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
Jon Elson
2004-01-14 21:23:25 UTC
Re: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
Jon Elson
2004-01-14 21:29:46 UTC
Re: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
industrialhobbies
2004-01-14 22:07:52 UTC
Re: Is a reduction drive necessary for servo motors?
Bob McKnight
2004-01-15 10:17:39 UTC
Re: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
Harvey White
2004-01-15 11:03:48 UTC
Re: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
Jon Elson
2004-01-15 21:37:42 UTC
Re: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
Bob McKnight
2004-01-15 21:59:38 UTC
Re: [CAD_CAM_EDM_DRO] Is a reduction drive necessary for servo motors?
ballendo
2004-01-16 09:04:48 UTC
Stepper vs. servo resolution was Re: Is a reduction drive nec
ballendo
2004-01-16 09:09:08 UTC
two types of servos was Re: Is a reduction...
Peter Homann
2004-01-16 16:32:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: Is a reduction drive necessary for servo motors?
Bob McKnight
2004-01-17 07:34:04 UTC
Re: [CAD_CAM_EDM_DRO] two types of servos was Re: Is a reduction...