Re: [CAD_CAM_EDM_DRO] why not just change the motor?
Posted by
Dave Dillabough
on 2004-01-25 07:34:59 UTC
Most dealers of clone mills would have a motor that would drop in. You
would also have to change or modify the electrics to match the different
current requirements and you would lose the variable speed option that the
VFD would provide.
At 05:12 PM 2004/01/22 -0500, you wrote:
would also have to change or modify the electrics to match the different
current requirements and you would lose the variable speed option that the
VFD would provide.
At 05:12 PM 2004/01/22 -0500, you wrote:
>ok if you have belt drive type like "M" or "J" head as for the rest its
>special housing. cul brian f.
>----- Original Message -----
>From: "jlsmith269" <jlsmith269@...>
>To: <CAD_CAM_EDM_DRO@yahoogroups.com>
>Sent: Thursday, January 22, 2004 10:22 AM
>Subject: [CAD_CAM_EDM_DRO] why not just change the motor?
>
>
> > I had an interesting thought...
> >
> > if you have a 3ph motor, on say a bridgeport, and there ARE hassles
> > involved with the VFD/or other phase convertor, as well as price, why
> > not replace the motor and wiring with a single phase 220?
> >
> > jeffe
> >
> >
Discussion Thread
jlsmith269
2004-01-22 07:22:32 UTC
why not just change the motor?
Kim Lux
2004-01-22 08:30:56 UTC
Re: [CAD_CAM_EDM_DRO] why not just change the motor?
Roy Morrison
2004-01-22 09:29:18 UTC
Re: [CAD_CAM_EDM_DRO] why not just change the motor?
Brian
2004-01-22 13:57:35 UTC
Re: [CAD_CAM_EDM_DRO] why not just change the motor?
jlsmith269
2004-01-22 18:03:37 UTC
Re: why not just change the motor?
Brian
2004-01-22 18:45:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: why not just change the motor?
Jon Elson
2004-01-22 22:06:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: why not just change the motor?
jlsmith269
2004-01-23 07:42:54 UTC
Re: why not just change the motor?
turbulatordude
2004-01-23 08:02:01 UTC
Re: why not just change the motor? VFD's
Jon Elson
2004-01-23 09:54:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: why not just change the motor?
metlmunchr
2004-01-23 09:56:22 UTC
Re: why not just change the motor?
Paul
2004-01-23 10:03:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: why not just change the motor?
Shawncd
2004-01-23 10:17:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: why not just change the motor?
turbulatordude
2004-01-23 10:26:58 UTC
Re: why not just change the motor? VFD Question ??
Shawncd
2004-01-23 11:07:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: why not just change the motor? VFD Question ??
fiteboss
2004-01-23 11:35:53 UTC
Re: why not just change the motor?
jlsmith269
2004-01-23 11:39:16 UTC
Re: why not just change the motor?
Jon Elson
2004-01-23 18:47:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: why not just change the motor? VFD Question ??
roel370@a...
2004-01-23 19:05:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: why not just change the motor? VFD Question ??
ballendo
2004-01-24 07:22:51 UTC
Just Use a VFD or converter! was Re: why not just change the motor?
Lee Studley
2004-01-24 07:34:10 UTC
MOVE ON:Just Use a VFD or converter! was Re: why not just change the motor?
Dave Dillabough
2004-01-25 07:34:59 UTC
Re: [CAD_CAM_EDM_DRO] why not just change the motor?