Poor Mans DRO
Posted by
eewizard_1
on 2004-01-26 19:41:09 UTC
After reading about the mouse guts DRO maybe some would be
interested in a low budget linear encoder.
The head burned out on an inkjet printer I had so I took it
appart to get the little motors. It had a nice 12" linear scale with
an HP quadrature detector for print head positioning. Some of the
printers go up to 2400DIP so don't just dump the old printers.
They're a gold mine of neat small parts (and full of ink from head
cleaning).
Al
interested in a low budget linear encoder.
The head burned out on an inkjet printer I had so I took it
appart to get the little motors. It had a nice 12" linear scale with
an HP quadrature detector for print head positioning. Some of the
printers go up to 2400DIP so don't just dump the old printers.
They're a gold mine of neat small parts (and full of ink from head
cleaning).
Al
Discussion Thread
eewizard_1
2004-01-26 19:41:09 UTC
Poor Mans DRO
jim_stoll
2004-01-27 08:09:18 UTC
Re: Poor Mans DRO
Jon Elson
2004-01-27 13:16:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Poor Mans DRO
jethrobodine
2004-01-27 13:58:25 UTC
Re: Poor Mans DRO
jethrobodine
2004-01-27 14:19:50 UTC
Re: Poor Mans DRO
ballendo
2004-01-27 16:20:02 UTC
Re: Poor Mans DRO
bull2003winkle
2004-01-27 18:22:42 UTC
Re: Poor Mans DRO
Jon Elson
2004-01-27 20:13:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Poor Mans DRO
Jon Elson
2004-01-27 20:21:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Poor Mans DRO
rawen2
2004-01-27 21:58:22 UTC
Re: Poor Mans DRO
gcjahnke2000
2004-01-28 04:53:31 UTC
Re: Poor Mans DRO
jethrobodine
2004-01-28 13:17:26 UTC
RE: [CAD_CAM_EDM_DRO] Re: Poor Mans DRO
Raymond Heckert
2004-01-28 17:12:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Poor Mans DRO
Ray Henry
2004-01-29 12:59:15 UTC
Re: Re: Poor Mans DRO
Jon Elson
2004-01-29 18:04:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Poor Mans DRO
Greg Jackson
2004-01-29 19:37:51 UTC
Ball Bar Tests & accuracy
Jon Elson
2004-01-29 21:37:29 UTC
Re: [CAD_CAM_EDM_DRO] Ball Bar Tests & accuracy
ballendo
2004-01-30 07:34:59 UTC
stepper accuracy compared to servos...
cnczeus
2004-01-30 09:19:52 UTC
Re: stepper accuracy compared to servos...
Paul
2004-01-30 10:14:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper accuracy compared to servos...
turbulatordude
2004-01-30 12:04:16 UTC
Re: stepper accuracy compared to servos...
Wayne Whippo
2004-01-30 16:01:36 UTC
Re: Ball Bar Tests & accuracy
Mariss Freimanis
2004-01-30 18:55:57 UTC
Re: stepper accuracy compared to servos...
Jon Elson
2004-01-30 19:56:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper accuracy compared to servos...
ballendo
2004-01-31 12:54:07 UTC
Re: stepper accuracy compared to servos...
eewizard_1
2004-01-31 12:54:40 UTC
Re: stepper accuracy compared to servos...
Greg Jackson
2004-01-31 13:06:04 UTC
RE: [CAD_CAM_EDM_DRO] Re: stepper accuracy compared to servos...
Paul
2004-01-31 13:37:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper accuracy compared to servos...
Greg Jackson
2004-01-31 13:44:36 UTC
RE: [CAD_CAM_EDM_DRO] Re: stepper accuracy compared to servos...
Jon Elson
2004-01-31 20:29:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper accuracy compared to servos...
Chris Cain
2004-02-02 09:13:19 UTC
RE: [CAD_CAM_EDM_DRO] Re: stepper accuracy compared to servos...