CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: PCB Routing - Dremel

on 2004-02-11 16:54:54 UTC
Some one posted that the spindles came no where near the posted speed. Bearing
drag alone, Is this normal or did he just get a bad one, oh have to high of
expectations..

Garry

> Hello,
>
> It's a 3 dollar motor, from surplus sources... (but mine has lasted
> well so far--about a month)
>
> Ballendo
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, John Johnson <johnatl@m...>
> wrote: > That's a good price on the spindle. I wonder how long the
> motor will > last though? > > Regards, > JJ > > On Tuesday, Feb 10,
> 2004, at 12:49 US/Eastern, Brian wrote: > > > Hi, Paul Jones has
> carbide cutters for sale, and good spindles that > > dont > > wabble
> like a dremmel. www.cnconabudget.com cul brian f. > > ----- Original
> Message ----- > > From: "John Johnson" <johnatl@m...> > > To:
> <CAD_CAM_EDM_DRO@yahoogroups.com> > > Sent: Tuesday, February 10, 2004
> 8:49 AM > > Subject: Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel > > >
> > > >> Dremel tools have ball bearings on the shaft which will
> withstand > >> axial > >> loads. > >> > >> For machining PCBs, you
> shouldn't have to worry about axial loads. > >> Machining PCBs is much
> less load than Ol' Joe sharpening his lawnmower > >> blade. > >> > >>
> If you can handle the tool before buying it, check for side-to- side >
> >> play, as well as up-and-down play in the spindle. You will probably
> > >> find the Dremel tools are excellent in this regard. If you're >
> >> considering a Chinese import, however, I would check this
> carefully. > >> > >> One other note, the Moto-tool with the digital
> speed control sounds > >> like it has feedback to maintain a certain
> speed, but if you read the > >> manual, it says the speed will vary
> with the incoming voltage. > >> > >> What kind of bits are you using
> to cut the traces? I recently broke my > >> 0.010" end mill (it still
> works for PCBs though :-)) and am looking > >> for > >> a replacement.
> I'm considering a 1/8" 60 deg cone shaped single flute > >> carbide
> bit, and wondering if it will work. > >> > >> FYI, www.mscdirect.com
> has the aforementioned bit, as well as PCB > >> drills with 1/8"
> shanks. > >> > >> Regards, > >> JJ > >> > >> On Tuesday, Feb 10,
> 2004, at 04:51 US/Eastern, Peter Cruickshank > >> wrote: > >> > >>>
> Hi; > >>> > >>> I recall seeing some threads regarding the choice of
> Dremel drill > >>> for PCB routing, something about one (or more) of
> the models has > >>> thrust bearing which would prolong it's life if
> you use it as a high > >>> speed Router Spindle on a Sherline Mill -
> any ideas ??? > >>> > >>> Didn't someone design a adaptor to attach a
> dremel to the sherline Z > >>> axis ?? > >>> > >>> Any help greatfully
> appreciated. > >>> > >>> CrankShaft. > >>> > >>> > >>> > >>>
> Addresses: > >>> FAQ: http://www.ktmarketing.com/faq.html > >>>
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ > >>> Post
> Messages: CAD_CAM_EDM_DRO@yahoogroups.com > >>> > >>> Subscribe:
> CAD_CAM_EDM_DRO-subscribe@yahoogroups.com > >>> Unsubscribe:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com > >>> List owner:
> CAD_CAM_EDM_DRO-owner@yahoogroups.com, > >>> wanliker@a..., > >>>
> timg@k... > >>> Moderator: pentam@c... indigo_red@q... > >>>
> davemucha@j... > >>> [Moderators] > >>> URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO > >>> > >>> OFF Topic
> POSTS: General Machining > >>> If you wish to post on unlimited OT
> subjects goto: > >>> aol://5863:126/rec.crafts.metalworking or go thru
> Google.com to reach > >>> it if you have trouble. > >>>
> http://www.metalworking.com/news_servers.html > >>> > >>>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be
> > >>> a sister site to the CCED group, as many of the same members are
> > >>> there, for OT subjects, that are not allowed on the CCED list. >
> >>> > >>> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING > >>> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO >
> >>> EXCEPTIONS........ > >>> bill > >>> List Mom > >>> List Owner >
> >>> > >>> > >>> Yahoo! Groups Links > >>> > >>> > >>> > >>> > >>> > >>
> > >> > >> > >> Addresses: > >> FAQ:
> http://www.ktmarketing.com/faq.html > >> FILES:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ > >> Post
> Messages: CAD_CAM_EDM_DRO@yahoogroups.com > >> > >> Subscribe:
> CAD_CAM_EDM_DRO-subscribe@yahoogroups.com > >> Unsubscribe:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com > >> List owner:
> CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a..., > > timg@k... >
> >> Moderator: pentam@c... indigo_red@q... davemucha@j... > >
> [Moderators] > >> URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO > >> > >> OFF Topic
> POSTS: General Machining > >> If you wish to post on unlimited OT
> subjects goto: > > aol://5863:126/rec.crafts.metalworking or go thru
> Google.com to reach > > it if > > you have trouble. > >>
> http://www.metalworking.com/news_servers.html > >> > >>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be
> > >> a > > sister site to the CCED group, as many of the same members
> are there, > > for OT > > subjects, that are not allowed on the CCED
> list. > >> > >> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
> DOMAIN BY POSTING > >> THEM. > > DON'T POST IF YOU CAN NOT ACCEPT
> THIS.....NO EXCEPTIONS........ > >> bill > >> List Mom > >> List Owner
> > >> > >> > >> Yahoo! Groups Links > >> > >> > >> > >> > >> > >> > > >
> > > > > > > > Addresses: > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ > >
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com > > > > Subscribe:
> CAD_CAM_EDM_DRO-subscribe@yahoogroups.com > > Unsubscribe:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com > > List owner:
> CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a..., > > timg@k... >
> > Moderator: pentam@c... indigo_red@q... davemucha@j... > >
> [Moderators] > > URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO > > > > OFF Topic POSTS:
> General Machining > > If you wish to post on unlimited OT subjects
> goto: > > aol://5863:126/rec.crafts.metalworking or go thru
> Google.com to reach > > it if you have trouble. > >
> http://www.metalworking.com/news_servers.html > > > >
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be
> > > a sister site to the CCED group, as many of the same members are >
> > there, for OT subjects, that are not allowed on the CCED list. > > >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING >
> > THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........ > > bill > > List Mom > > List Owner > > > > > >
> Yahoo! Groups Links > > > > > > > > > >
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@... Moderator: pentam@...
> indigo_red@... davemucha@... [Moderators] URL to this
> group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> it if you have trouble. http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be
> a sister site to the CCED group, as many of the same members are
> there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill List Mom List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>

Discussion Thread

Peter Cruickshank 2004-02-10 01:52:58 UTC PCB Routing - Dremel Brian 2004-02-10 05:10:28 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel John Johnson 2004-02-10 05:49:35 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Peter Cruickshank 2004-02-10 06:23:09 UTC Re: PCB Routing - Dremel John Johnson 2004-02-10 08:31:24 UTC Re: [CAD_CAM_EDM_DRO] Re: PCB Routing - Dremel Jim Stoll 2004-02-10 09:09:22 UTC Re: PCB Routing - Dremel Brian 2004-02-10 09:48:58 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel John Johnson 2004-02-10 10:01:33 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Steven Ciciora 2004-02-10 13:49:25 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Jeff Jones 2004-02-10 16:58:38 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel ballendo 2004-02-10 17:02:20 UTC Re: PCB Routing - Dremel ballendo 2004-02-10 17:04:22 UTC Re: PCB Routing - Dremel JanRwl@A... 2004-02-10 19:42:33 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Brian 2004-02-10 19:59:11 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel John Johnson 2004-02-11 04:04:50 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Bill Kichman 2004-02-11 08:47:51 UTC RE: [CAD_CAM_EDM_DRO] PCB Routing - Dremel JanRwl@A... 2004-02-11 15:10:04 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel John Johnson 2004-02-11 16:19:30 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Garry & Maxine Foster 2004-02-11 16:54:54 UTC Re: [CAD_CAM_EDM_DRO] Re: PCB Routing - Dremel Alan Marconett KM6VV 2004-02-11 18:46:40 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Ed Gilbert 2004-02-11 19:43:48 UTC RE: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Bob McKnight 2004-02-11 22:20:45 UTC RE: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Brian 2004-02-12 00:49:36 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel John Johnson 2004-02-12 06:25:14 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel John Johnson 2004-02-12 06:28:52 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel