CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel

Posted by Brian
on 2004-02-10 19:59:11 UTC
yea right, i have 3 and 2 are bushings of bronze! also i have a dental drill
motor from the old style cable drill, rated at 15000 rpm, it has bronze
bushings too. all my dremmels have too much wabble for engraving anything.
cul brian f.
----- Original Message -----
From: <JanRwl@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, February 10, 2004 10:41 PM
Subject: Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel


> In a message dated 2/10/2004 7:51:06 AM Central Standard Time,
> johnatl@... writes:
> Dremel tools have ball bearings on the shaft which will withstand axial
> loads.
> In which galaxy?
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Discussion Thread

Peter Cruickshank 2004-02-10 01:52:58 UTC PCB Routing - Dremel Brian 2004-02-10 05:10:28 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel John Johnson 2004-02-10 05:49:35 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Peter Cruickshank 2004-02-10 06:23:09 UTC Re: PCB Routing - Dremel John Johnson 2004-02-10 08:31:24 UTC Re: [CAD_CAM_EDM_DRO] Re: PCB Routing - Dremel Jim Stoll 2004-02-10 09:09:22 UTC Re: PCB Routing - Dremel Brian 2004-02-10 09:48:58 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel John Johnson 2004-02-10 10:01:33 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Steven Ciciora 2004-02-10 13:49:25 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Jeff Jones 2004-02-10 16:58:38 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel ballendo 2004-02-10 17:02:20 UTC Re: PCB Routing - Dremel ballendo 2004-02-10 17:04:22 UTC Re: PCB Routing - Dremel JanRwl@A... 2004-02-10 19:42:33 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Brian 2004-02-10 19:59:11 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel John Johnson 2004-02-11 04:04:50 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Bill Kichman 2004-02-11 08:47:51 UTC RE: [CAD_CAM_EDM_DRO] PCB Routing - Dremel JanRwl@A... 2004-02-11 15:10:04 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel John Johnson 2004-02-11 16:19:30 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Garry & Maxine Foster 2004-02-11 16:54:54 UTC Re: [CAD_CAM_EDM_DRO] Re: PCB Routing - Dremel Alan Marconett KM6VV 2004-02-11 18:46:40 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Ed Gilbert 2004-02-11 19:43:48 UTC RE: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Bob McKnight 2004-02-11 22:20:45 UTC RE: [CAD_CAM_EDM_DRO] PCB Routing - Dremel Brian 2004-02-12 00:49:36 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel John Johnson 2004-02-12 06:25:14 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel John Johnson 2004-02-12 06:28:52 UTC Re: [CAD_CAM_EDM_DRO] PCB Routing - Dremel